Bestfilez.net - новости мира Hi-tech
29.03.24  
Новости :: Software

MemTest86 Version 5.0

MemTest86 утилита для тестирования оперативной памяти. Использование в качестве среды DOS обусловлено многими причинами, в частности из-за невозможности полного доступа ко всей оперативной памяти из Windows.

Memtest записывает в каждый блок памяти информацию, а затем считывает её и проверяет на ошибки.

Работа происходит циклически, все тесты повторяются неограниченное количество раз, пока пользователь не отменит их соответствующей командой, что позволяет выявить и составить список плохих блоков памяти в формате BadRAM. Программа запускается с помощью собственного загрузчика, поэтому наличие операционной системы для её работы не обязательно. 

Благодаря такому подходу проверяется весь объём оперативной памяти, основательно и весьма точно выявляя не только явные производственные дефекты модулей памяти, но и скрытые слабые участки адресного пространства, под высокой нагрузкой дающие сбои.
 


Подробнее о тестах программы:

Test 0 [Address test, walking ones, no cache] – тест для определения проблем с адресацией памяти.

Test 1 [Address test, own address] – более углубленный тест для определения проблем с пропиской адресацией памяти

Test 2 [Moving inversions, ones&zeros] - быстрая проверка на аппаратные или трудноуловимые ошибки.

Test 3 [Moving inversions, 8 bit pat] - тоже самое, только используется 8 битный алгоритм прохода нулей и единиц (не волнуйтесь, в подробности вникать не обязательно). Использует 20 схем для теста

Test 4 [Moving inversions, random pattern] - этот тест особенно эффективен для выявления проблем с data sensitive. Использует 60 схем для теста

Test 5 [Block move, 64 moves] – тест для поиска проблем в схемах памяти.

Test 6 [Moving inversions, 32 bit pat] - эффективен для определения data sensitive errors. Очень долгий тест.

Test 7 [Random number sequence] - тест, проверяющий ошибки записи памяти.

Test 8 [Modulo 20, ones&zeros] - тест для определения скрытых ошибок при помощи кеша и буферизации, которые не выявили предыдущие тесты.

Test 9 [Bit fade test, 90 min, 2 patterns] - особый тест, который можно запустить вручную. Запоминает адреса в памяти, после чего засыпает на полтора часа. После этого проверяет не изменились ли биты в адресах. Требует 3 часа для прохождения и ручного запуска через меню конфигурации (клавиша "C”).


What"s New in Version 5?

MemTest86 supports booting from both the newer UEFI platform and the traditional BIOS. When booting from UEFI, MemTest86 has access to additional services not available in BIOS including:

  • Native 64-bit support
  • No longer requires the use of the PAE workaround to access more than 4GB of memory. (PAE = Physical Address Extension)
  • Mouse support, where supported by the underlying UEFI system. On older systems a keyboard is still required.
  • Improved USB keyboard support. The keyboard now works on systems that fail to emulate IO Port 64/60 correctly. So Mac USB keyboards are now supported.
  • Improved multi-threading support, where supported by the underlying UEFI system.
  • Reporting of detailed RAM SPD information. Timings, clock speeds, vendor names and much more.
  • Support to writing to the USB drive that MemTest86 is running from for logging and report generation. In all prior MemTest86 releases, there was no disk support.
  • Use of GPT. (GUID Partition Table)
  • ECC RAM support (limited hardware support, ongoing development)
    • Detection of ECC support in both the RAM and memory controller
    • Polling for ECC errors
    • Injection of ECC errors for test purposes. (limited hardware only)
  • DDR4 support (but we are currently having problems sourcing DDR4 RAM to test)
  • Option to disable CPU caching for all tests
  • Having a configuration file to allow settings to be pre-defined without the need for keyboard input. This can help with automation.
  • Support for Secure Boot.
  • Speed improvements of between 10% and 30%+. Especially for tests, #5, #8 & #9. This is the result more moving to native 64bit code, removing the PAE paging hack, switching compilers and using faster random number generation algorithms.
  • Addition of 2 new memory tests to take advantage of 64bit data and SIMD instructions.

See thefeature comparisonpage for a summary of the differences between the various editions of MemTest86.

If UEFI is not supported on the system, the older v4 BIOS version is booted. MemTest86 can boot from a CD, USB flash drive or, with Linux systems, by the boot loader (for example, LILO or Grub). Any Windows, Linux or Mac system may be used to create the CD or USB flash drive. Once a MemTest86 boot disk has been created, it may be used on any x86 (PC/Mac) computer.


Notes:
  • IMPORTANT: MemTest86 V5 image supports dual booting (UEFI/BIOS).On machines that don"t support UEFI, the older V4 BIOS release of MemTest86 will be automatically booted.
  • Installation and usage instructions are available on theTechnical Information page
  • MemTest86 is a stand-alone program that does not require or use any operating system for execution. The version of Windows, Linux, or Mac being used is irrelevant for execution. However, you must use either Windows, Linux or Mac to create a bootable CD, Floppy or USB drive. The Windows and Linux/Mac packages are identical except for the compression and installation methods.
  • MemTest86 will not run on older PowerPC Mac systems. It was January 2006 when Apple started switching from PowerPC CPUs to Intel x86 CPUs. So machines earlier than 2006 definitely won"t work.
System Requirements
  • UEFI or BIOS platform firmware
  • Windows, Linux, or Mac OS
  • CD or USB Flash Drive

Разработчик: PassMark Software
Лицензия: FreeWare
Язык: English
Размер: 4.73 MB

Windows Downloads:

Linux/Mac Downloads:

 



Опубликовано 01.02.14

Новости Hi-tech
Яндекс.Метрика

sitemap sitemap.xml
Сайт сделан на SiNG cms © 2010-2020