NEC/RENESAS USB3 Controller (uPD720201 & uPD720202) Drivers V. 3.0.8.0Цитата
Release note 3.0.8.0
1. A specific USB Full Speed device that can't respond to a standard request isn't detectd.2. There is a possibility that a multi-display isn't displayed after S3->Resume when the USB-to-VGA device connected to the USB 3.0 Host is used in multi-display mode. This issue occurs depending on USB-to-VGA device driver version.3. There is a possibility that the Bluetooth communication is cut off with a specific Bluetooth module.4. There is a USB speaker which only requests a data transfer by a URB within about 1ms. In this case, sound is cut off depending on CPU performance. 5. iPad isn't detected on iTunes application after S3->Resume. 6. BSOD ("Blue Screen of Death," i.e., system halt) occurs when PC shoutdown is performed while a specific Bluetooth module (Billionton BT-0003) is connected and a specific Bluetooth module driver version is being used. This issue doesn't occur with the latest Bluetooth module driver version.- The following additional issues were fixed.-- Driver 1. There is a possibility that BSOD occurs or USB 3.0 Hub isn't detected on Windows XP when hot plug operation is done with a USB 3.0 Hub having USB devices already connected to it. 2. USB 3.0 Host controller Driver forcibly caused BSOD from ver2.1.16.0 to ver 2.1.25.0 when Host System Error of USB 3.0 occurred. When we updated to ver2.1, we had a mistake in which the USB 3.0 Host Controller Driver focibly caused BSOD. 3. A USB device isn't detected when the USB device is connected to a downstream port on a specifc USB 3.0 Hub that moves to U2 state althouth U1/U2 timeout vaule is zero.4. There is a miscalucuation of U2 Exit Latency. --Monitor 1. The pop-up message is wrong when a USB 3.0 device is connected to USB 2.0 port while running the Simplified Chinese OS.2. The pop-up message is wrong when USB 3.0 Host Controller does not have enough bandwidth available while running the Polish OS.
http://www.station-drivers.com/telechargement/nec/divers/renesas_usb3_3.0.8.0(www.station-drivers.com).exe