WirelessMon 4.0 Build 1005, навороченный WiFi сканер Опции

[WWN]

WirelessMon v2.0
a software tool that allows users to monitor the status of wireless WiFi adapter(s) and gather information about nearby wireless access points and hot spots in real time. WirelessMon can log the information it collects into a file, while also providing comprehensive graphing of signal level and real time IP and 802.11 WiFi statistics.

-Verify 802.11 network configuration is correct.
-Test WiFi hardware and device drivers are functioning correctly.
-Check signal levels from your local WiFi network and nearby networks.
-Help locate sources of interference to your network.
-Scan for hot spots in your local area (wardriving)
-Create signal strength maps of an area
-GPS support for logging and mapping signal strength ОСОБО ОТМЕЧУ ЭТУ ФИЧУ
-Correctly locate your wireless antenna (especially important for directional antennas).
-Verify the security settings for local access points.
-Measure network speed & throughput and view available data rates.
-Help check Wifi network coverage and range

хомяк:
w$w.passmark.com/products/wirelessmonitor.htm

[WWN]

полный боекомплект

сперва включаем на машине вайфай, затем установливаем сабж, делаем инъекцию,
НЕ ЗАПУСКАЯ и не выключая вайфая перезагружаемся - и после этого пользуемся

[drSAB]

PassMark WirelessMon 2.0 build 1012
->http://www.passmark.com/ftp/wirelessmon.exe

[drSAB]

PassMark WirelessMon 2.0 build 1013
->http://www.passmark.com/ftp/wirelessmon.exe

[drSAB]

PassMark WirelessMon 2.1 build 1000
=>http://www.passmark.com/ftp/wirelessmon.exe

[drSAB]

WirelessMon 2.1 build 1001
984Kb
=>http://www.passmark.com/ftp/wirelessmon.exe

[drSAB]

PassMark WirelessMon 3.0 build 1002
2397KB
->http://www.passmark.com/ftp/wirelessmon.exe

[Leon71]

PassMark WirelessMon 3.0 build 1002

[layman]

PassMark WirelessMon 3.1 build 1000

- Added support for MetagGeek Wi-Spy DBx, 2.4x and 2.4i devices. They can be used with the map tab in channel mode to get signal strengths for possible devices causing interference that don't show up as access points
- Added channel mode to map tab, can display signal strengths based on channel rather than just access point
- Added Wi-Spy mode to channel graph on summary tab showing the average and peak signals for the channels at that moment
- Changed summary channel graph to use a drop down list for selecting different options
- Added indication in summary list if access point is running in A, B, G or (Vista+ only) N mode
- Improved speed of summary list updating
- Removed most of the redraw flicker on summary tab after updating the list
- Fixed a bug where some non-english versions of windows would report the "Could not find performance counters" error message
- Fixed a bug in the interpolation function where it could sometimes use the wrong sample point (offset by 1) when calculating the average for interpolated values
- Fixed a bug where WirelessMon could freeze during taking sample on the map tab
- Fixed a crash that could occur on the graph tab when switching between access points and the current network card

Size: 2.42 Mb
_http://www.passmark.com/ftp/wirelessmon.exe

[drSAB]

PassMark WirelessMon 3.1 Build 1001

- Made some changes when loading network counters for detected network cards
- Fixed crash when adding access points to list on map tab
- Fixed a bug where clicking the add all button in some cases could add duplicate entries

2487,79 Кб
->http://www.passmark.com/ftp/wirelessmon.exe

[drSAB]

PassMark WirelessMon 3.1 Build 1002
2740,11 Кб
->http://www.passmark.com/ftp/wirelessmon.exe

[drSAB]

PassMark WirelessMon 3.1 Build 1003
2742,15 Кб
->http://www.passmark.com/ftp/wirelessmon.exe

[Leon71]

PassMark WirelessMon 3.1 Build 1004

V3.1 build 1004 23/December/2009
Changed connected node log to include SSID, MAC address and channel information to help track when a network card changes access points (roams) during the logging
Fixed a crash in Vista/Win7 with long SSID names
V3.1 build 1003 18/November/2009
Fixed a crash that could occur in Windows7 and Vista when the OS reports a large number of network devices
Changed error message about missing network counters and will now automatically open the WirelessMon FAQ

2,68 Mb
_http://www.passmark.com/ftp/wirelessmon.exe

[drSAB]

PassMark WirelessMon 4.0 Build 1005
3104,02 Кб
http://www.passmark.com/ftp/wirelessmon.exe