DVD Rebuilder Pro, Утилита для backup-а и ужатия DVD Опции

[Bish]

DVD Rebuilder Professional Edition v1.00.RC5.1, © JDobbs
Офф.сайт:_http://www.jdobbs.net/
Платформа:WinAll

DVD Rebuilder - утилита предназначенная для копирования и сжатия DVD-дисков. Несмотря на обилие утилит для ужатия DVD, лишь DVD ReBuilder способен сделать это достаточно качественно. Приложение может сделать точную копию DVD, включая меню, языковые переводы фильма, субтитры и т.д. DVD Rebuilder подготавливает DVD для записи и копирует его на PC, создавая свой проект, в котором и помещаются все данные, считанные с DVD-диска. Но можно скопировать и не все, а только нужные вам данные с DVD (напр. выбрать только нужный язык, убрать субтитры ). И, как упомяналось выше, при помощи DVD Rebuilder можно качественно ужать оригинальный DVD диск, который может быть объёмом более 10 Gb, для записи на обычную DVD-болванку объёмом 4.7 Gb. Такой диск уже можно будет просматривать на бытовом DVD-плейере. Во время работы для перекодирования видео, DVD Rebuilder может использовать следующие кодеки: CinemaCraft Encoder Basic/SP, QuEnc (ffmpeg) encoder и ReJig transcoder (какой-то из этих кодеков должен быть установлен в системе).
Features:
* Video Segment Editing -- The ability to select, view video segments, and remove/edit DVD contents
* Movie and Menus Only capability -- allows you to get the best quality within limited available space
* Segment Blanking -- Provides you a capability to remove annoying intro screens
* Slideshow Mode -- Convert "Extra" segments into a slideshow, saving valuable space for the Feature.
* Advanced Encoding Features -- Modify GOP size, add customized encoder quantizer matrices, set DC precision
* Movie-Only mode that gives the highest quality possible. Every available bit is dedicated to the feature.
* One pass encoding support for HC encoder. Gives high quality results in much less time.
* Graphic Analysis display for use in analyzing the IFO structure -- draws PGC/CELL relationships.
* ISO file creation is now supported to make it easier to archive or burn DVD-RB's output.
* Automatic burning using DVD Decrypter -- makes complete DVD Backup truly "one-click."
* New intuitive interface -- modernizes and simplifies control of your rebuild!
* Full support for video interleaving (ILVU) -- re-encodes angle and seamless branching.

Линк на закачку v0.94:_http://www.jdobbs.net/freeware/DVD-RBv094Free.zip

[Bish]

DVD Rebuilder Professional Edition v1.00.RC5.1

[Plague]

[Bish]

DVD Rebuilder Professional Edition v1.01 FINAL

[Bilko]

[Bish]

DVD Rebuilder Pro v1.03
Что нового:
- Improved the peak bitrate determination algorithm. It now more accurately determines source bitrates and works properly with NTSC interlaced sources.
- Fixed a bug that could cause "Runtime Error 380" under some circumstances. This should make audio removal in DVD ReMake Pro compatible with DVD-RB.
- Corrected an error in which source filenames that are a mixture of uppercase/lowercase letters might cause "Error 0003, buffer overflow".
- Corrected a setting that might, under certain circumstances, allow NTSC interlaced ILVU sources to fall out of specifications.
- Fixed an error that under specific conditions could create video streams that exceed maximum bitrates.
- Updated OPV code to help prevent undersizing when encoding NTSC sources or when selecting a GOP size other that 12.
- Fixed an error in which it was possible that an audio glitch might be inserted at a layer break or point where the SCR gets reset to zero.
- Added an option to the "Select ISO Output Options" dialog that will remove the .ISO image from the output path after a successful image burn. This is meant to minimize required disc space, please use it cautiously.

[Bish]

[Bish]

DVD Rebuilder Professional 1.04 FINAL, November 28th, 2005
Что нового:
- Reorganized the "Options" configuration. It is no longer accessed as a Menu. Now it is accessed via a Tree View on either the tab bar, or, for for pre-version 1.00 skins, via an "Options" choice in the "Settings" menu. The menu had grown too large for easy use. Some "quick access" items remain under the "Settings" menu.
- Added a setting under the "Mode" menu in which you can select all Extras for Half-D1. This option will not reduce bitrates for Extras (like Half/Half), but settings selected under "Steal Space from Extras" will be applied. This provides more granularity so the option can be used more effectively.
- Corrected an issue in which certain odd original anomalies might cause timing issues. A special thanks to Magic144 for finding this one.
- Fixed an error that, under certain circumstances, might cause video ticks or stutter at chapter or segment break points.
- Tweaked the muxing algorithm to facilitate better video playback buffering control.
- Changed the default setting for the Viewer/Editor so its calls use long filenames. Some users were having trouble getting it to work properly.
- Updated the Installer to use a newer version of HC Encoder (v0.16, 11/12/2005). This file is also included in the "Update Only" zip file.
- Updated installer to use EclPro v0.52. Includes better compatibility and support for Express versions.
- Corrected an error in which an erroneous input stream might cause DVD-RB to "hang" during PREPARE phase looking for a nonexistent extension start code.

[Bish]

DVD Rebuilder Professional 1.04 Final

[Tomaris]

DVD Rebuilder Professional 1.04 Final Без всяких к... 

что делать с файлом, лежащим в папке License? Спасибо

[Bish]

Tomaris
Скопировать License/REBUILDER.RBK в папку, где лежит DVD Rebuilder,
это написано в .nfo.

[Bish]

DVD Rebuilder Professional 1.04 Final

[Bish]

DVD Rebuilder Professional 1.05, December 14th, 2005
Что нового:
- Added "Template" feature.
- Bug fixes.
- Updated keying mechanism, now the key download is automatic

[Dickk]

[rhcp]

Professional Edition Version 1.05
Below is a summary of the changes/updates associated with this version (Pro release):
- Added "Template" options under the "File" menu. Now you can load and save settings that you find to be especially useful for different types of sources, such as film, anime, cartoon, CG, series discs, etc. All you have to do to create a new template is to set up Rebuilder in the way you'd like to encode a certain type of disc, for example: the CCE or HC bias, matrices, GOP sizes, or filters -- then select "Save Template". If you have settings you find useful for certain source types, post the template on the Rebuilder forum at www.doom9.org or www.dvd-rb.com and it may be added to future DVD Rebuilder versions.
- Corrected an error that could result in "Error 0006, Framecount differences..." when working with the null output of some ripping programs.
- Fixed a sizing issue in which unreferenced audio streams that exist in the original VOB files were included in the output -- but weren't properly accounted for in the size calculation.
- Modified the ReJig calling procedure so that DVD-RB uses less processor time during calls. This should speed up ReJig.
- Change the GOP setting for HC encoder so that if version 0.16 or greater is used, "*GOP 12 2" is not forced for FILM sources.
- Added dummy pre-command and "Exit" post-command to the IFO generated by "Movie Only" encodes. It seems there are certain players that will not play correctly unless a command table is present. A special thanks to rayvt for finding the cause and cure of this problem.
- Corrected an error which might cause DVD-RB to "hang" at the 100% during PREPARE.
- Revamped the keyfile process. Too many folks were having trouble using the .RBK files. Now DVD Rebuilder will download the keyfile itself. The keyfile is also now linked to an individual computer via System ID. I've tried to make it as painless as possible. Please read the HELP information in the registration dialog. A new EXE file called Reg-RB.EXE is included in the DVD-RB directory and it can be run to get the system id and download your key for any computer upon which you wish to run Rebuilder.. It is called automatically by DVD-RB when needed. There is a default limit of 5 System IDs allowed for each registered e-mail address.

Professional Edition Version 1.05.2
Below is a summary of the changes/updates associated with this version (Pro release):
- Corrected an error in which VIDEO_TS file for a Movie Only disc could have a wrong value set in the First Play PGC table.
- Corrected the PGC Program Table size for the IFO created in Movie-Only mode so it's length is always a multiple of two. This cause playback problems in at least one player model.
- Lowered the default VBR minimum bitrate for CCE to 300 (from 500). It was set to 500 in v0.83 in order to circumvent problems with CCE 2.70. These seem to be no longer present, but as a precaution code was added to dynamically increase the to value to 500 in the event of problems. Also added code that will automaticlly adjust it back up to 500 if an encoding pass fails. The lower value should result in slightly better overall picture quality as fewer bits are wasted on low demand scenes.
- Fixed an error in the registration process in which using uppercase characters (the first time) in the e-mail field might make the registration fail repeat upon each load.
- Reduced the aggressiveness of the layer break removal, as some Sony Players appear to be very strict in how they handle streams marked with the "seamless" flag. If you wish to override this setting, add "AGGRESSIVE_LAYER_BREAK_REMOVAL=1" to the "[Options]" area of the REBUILDER.INI file.
- Updated HCBatch.exe to the most recent version.
- Increased GOP buffer size to help reduce the likelihood of buffer overflows (0003 and 0004) on some rare sources. Note, though, that 0003 and 0004 are indicators of a malformed source -- and most typically indicate a corrupted source file. This is usually due to preprocessing.
- Modified the CCE Advanced Settings dialog so it uses sliders instead of dropdown boxes.


Professional Edition Version 1.06
Below is a summary of the changes/updates associated with this version (Pro release):
- Added support for DGDECODE v1.4.5. This update includes many enhancements/bug fixes and makes DVD-RB's support consistent with Neuron2's most current release. Support for MPEG2DEC3DG and DGDECODE v1.1.0 remains. This update includes a fix which corrects a rare problem in which an encoder may "freeze" while trying to encode a segment. The DVD-RB installer now includes and installs DGDECODE v1.4.5 by default.
- Added coding for handling "garbage" sectors that were found to have caused problems during the PREPARE phase on at least one disc. Thanks to SpazzHH for finding a disc in which it was repeatable.
- Modified the AVS position of the trim() command. Performing the trim after the insertion of some optional filters can give better results.
- Updated some cosmetic features for consistency. Changed slider for HC Bias, and added TextColor variable to CCE settings Skin.
- Corrected a Button Over Video (BOV) issue. In some very active streams BOV may not have been reproduced properly.
- Corrected an error in the REBUILD module that could misinterpret certain input streams and as a result, throw a "ERROR 006: DVD-RB...framecount differences" error.
- Fixed a problem in which an extremely unlikely set of circumstances might cause audio to move out of sync over the course of a segment.
- Fixed a bug in which remapping audio while set to "Movie-Only" mode would cause a Runtime Error 9.
- Added a module that performs key download via web in the event of direct connection failure.
- Removed annoying "VOB Count" warning in Movie-Only modes.

Professional Edition Version 1.06.1
Below is a summary of the changes/updates associated with this version (Pro release):
- In order to facilitate the changed iDCT options of DGDECODE v1.4.5, the iDCT selection table is now changed depending upon the version selected.
- Updated the skins to reflect newer button format on the CCE Settings dialog.
- Added the selected reduction percentage to the "Steal Space from Extras is enabled" line that is displayed and logged.
- Corrected a bug in which certain parameters were not being loaded correctly when starting by double-clicking on a .RBP file.
- Fixed a bug related to field order detection and encoding introduced in v1.06 in which a specific set of (unusual) circumstances might cause the order to be incorrectly detected.
- Updated routines to take advantage of newer CCE abilities (v2.69 and greater) to output bottom field first (BFF) interlaced streams. Now when
the original stream is BFF -- the new stream can retain this characteristic.
- Enhanced the REBUILD engine so it will now accept field based picture structures. This might improve ProCoder encoding of interlaced streams (if enabled). It will also stop Error #0006 when using ReJig or "No Compression" on streams that use that structure.
- Fixed the "BlankText" INI parameter so it will work with Half-D1 sources that are being blanked.

Professional Edition Version 1.07
Below is a summary of the changes/updates associated with this version (Pro release):
- Implemented menu encoding. This new feature will now scan and reencode menu segments in the same way as standard title sets. This should save some space, allow for more efficient use of space, and improve quality. It is especially useful on titles that have large amounts of space used by menus. The default setting encodes any menu that is over 50MB. This can be overridden by setting a value for the "hidden" parameter "VTSM_MIN_SIZE" in the [Options] area of the REBUILDER.INI. It works similar to the "VTS_MIN_SIZE" parameter. It is recommended that you keep the default setting, as encoding segments that smaller than 50MB usually only increases encoding time without significantly improving qualty. If you prefer no menu encoding at all, this feature can be disabled or enabled via the "Settings" menu.
- Added code to enable multiple encoder instances. The feature is available under the "Settings" menu. On multiple core computers and some very fast
single core computers using hyperthreading this will take advantage of unused processor time. This concept has been proven in concept using HC encoder, QuEnc, and ProCoder (via ECLPRO) in Rumbah's "DualDVDRB" software. Please note that if your computer already runs at 100% of its processor time this option will not likely improve your speed and in fact may make it slightly slower. But, on some processors and some encoders it has been reported to increase speeds by as much as 30-50%. Heavy Kudos to Rumbah for exploring and proving this concept via "DualDVDRB."
- Corrected "Runtime Error 55" that could occur if attempting to force-close DVD-RB during encoding.
- Corrected a reference to "32-Bit Floating Point" in the iDCT choices for DGDECODE v1.4.5. It actually is "64-Bit Floating Point".
- Corrected an error in which the intra_DC_precision setting could be set incorrectly in CCE Basic and CCE SP v2.50 under some circumstances.
- Fixed an error in which the "Enable Output" option wasn't being properly reset on project loads or during batch encoding.
- Added Menu Segments to Segment Editor so they can be blanked or slideshow adjusted. Be careful, as disabling a menu background can sometimes make the function of the menu impossible to understand. Menu segments are listed as "VTM_nn" in the editor.
- Updated the installer to include HC Version 0.17.

Changes made for version 1.07.1
- IMPORTANT BUG FIX: Corrected an error in the Menu Encoding module in which some menus may be encoded without audio.
- IMPORTANT BUG FIX: Corrected an error in which the encoding process can "hang" while doing an ILVU segment.
- Modified OPV maximum bitrate calculation during the prediction phase in order to prevent possible "OPV VBV ovf" errors.
- Updated the Installer to use a version of ECLPRO that supports multiple instances.
- Corrected iDCT "64-Bit SSE2MMX" to "32-Bit SSE2MMX"
- Fixed an error in which he HalfD1 checkmark was not properly resetting upon new source load.

Professional Edition Version 1.07.2
Below is a summary of the changes/updates associated with this version (Pro release):
- Fixed a bug that could cause subpictures that are selected for removal to be also incorrectly removed from Menus. This could make the menu selections fail to function.
- Corrected an error in which on rare occasions the output BUP file be incorrectly updated during a certain type of menu encode sequence.
- Corrected some bugs associated with menu encoding and Half-D1/Anamorphic conversion. Also disabled filters for menu encodes.

Professional Edition Version 1.08.1
Below is a summary of the changes/updates associated with this version (Pro release):
- NEW FEATURE: Added automatic detection and extraction of segments that don't need reencoding. This makes it possible, e.g., for "Steal Space from Extras", "Half-D1/Half Space", Menu Encoding, or possibly even simple removal of a large audio track to allow the main feature's video to be kept completely intact. Included a "Force Reencode" selection under the "Options" menu which will override this feature when you wish filters to be applied.
- Added a "Force No Reencoding" to the Video Segment Editor/Viewer. This will allow you to select segments for which you wish the video portion to remain intact. Note that this setting reduces the "recovered" amount that can be added to the feature -- and can lead to a negative feature bitrate. When this happens the "Save Settings" button is disabled.
- Added a selection under the "Settings" menu that allows you to choose to size for DVD-5 (single layer) or for DVD-9 (dual layer) output. Also added DL target size adjustment parameter for each encoder. You can set size for DLTargetSectors or any of the encoders (just add "DL" to any of the old target settings, e.g. HCTargetSectors would become DLHCTargetSectors). This capability was added to satisfy requests -- but also to support other new upcoming features. Note that the "DVD-9" option is new and SHOULD BE CONSIDERED "BETA" -- use with caution until it is completely debugged.
- Added an option under the "Settings" menu that allows you to set the process priority of the encoder to NORMAL or IDLE (low) priority. This can be useful for times when you are using your computer for other purposes while encoding. Careful, though, using the IDLE priority can also slow down encoding dramatically when any other process is in progress.
- Fixed an error that could cause certain types of menu still pictures to not display -- causing what could be perceived as several other menu problems.
- Corrected a miscalculation related to menu encoding that might lead to oversizing (especially when using TargetSector settings that have been increased from the default).
- Updated some of the calculation methods in the Segment Viewer, using the old methods it was possible to lose sizing accuracy when portions of the Feature VTS were blanked or set for SLIDESHOW mode.
- Added "quick" keys to the segment editor. You can now press "B" to blank, "S" for slideshow, "F" to force no reencoding (keep video intact) and either "N" or "Space" to set back to normal.
- Corrected an error in which the "Half-D1/Half Space" option was not working properly and output video may not have been resized.

Сообщение было отредактировано drSAB: 27.05.2007 - 22:54

[rhcp]

[dimveld1]

[Bish]

[Ppattapp]

Вроде все правильно делаю но когда запускаю бекап то прога просто закрывается и все :(

[rhcp]

Вроде все правильно делаю но когда запускаю бекап то прога просто закрывается и все

[dimveld1]

[KeyGen]

DVD Rebuilder Pro 1.10.2 3 July 2006
История версий на форуме:
_http://forum.doom9.org/showthread.php?p=848235#post848235

Или:

- Fixed a problem with the new editor in which automatic blanking and slideshow that is executed when "Movie and Menus" or "Move, Menus, and Slideshow Extras" was not reallocating saved space to the feature. This only happened when "Use Beta (test) Viewer/Editor" was selected. Extreme undersizing of output could occur.

- Corrected a bug introduced in v1.10 that was related to the new Viewer/Editor. This bug could result in "Corrupt stream" message when using one of the "Movie and Menus" or "Move, Menus, and Slideshow Extras" modes was selected. It could also cause these modes to fail.

- Corrected an error in which clicking on the MENUS option when no menus were being reencoded could cause a "Runtime Error 13". (v1.10.1)

[KeyGen]

[ashok]

Jdobbs DVD Rebuilder PRO v1.10.5

[sdriven]

DVD Rebuilder Pro 1.10.6b Retail