IPB

Здравствуйте, гость ( Вход | Регистрация )

> Правила форума

Все описания припарок и ссылки на сторонние ресурсы, за исключением офсайтов программ и их зеркал, должны оформляться с помощью тега скрытого текста - [hide=1]примочка(тип, автор) + URL [/hide] и никак иначе. За нарушение будет строгое наказание.

> Global Mapper 11, Просмотр, конвертация картограф. данных
Bish
25.11.2004 - 01:54
Сообщение #1



Visionary
Group Icon
Группа: Старейшины
Сообщений: 4982
Регистрация: 13.06.2004
Из: Россия

Пользователь №: 50472




Global Mapper 6.04
Прикрепленное изображение

Global Mapper - это универсальная программа, позволяющая просматривать, конвертировать, преобразовывать, редактировать, распечатывать различные карты и векторные наборы данных. Ваши данные могут быть загружены как слои (при работе в Digital Elevation Model), или быть загружены как отсканированая топографическая карта, для 3D изображения местности. Может работать в реальном времени, загружая данные с присоединённого к компьютеру GPS приёмника. Поддерживает огромное количество форматов, имеет много различных инструментов и опций. С ее помощью можно подсчитывать расстояния от одного объекта до другого, подводить контуры изображения, настраивать контрастность и т.д. Используя встроенный скриптовый язык, можно упростить работу, задав повторяющиеся задания в качестве выполняемой функкции. Просматривает форматы: DLG-O, DRG, DOQ, DEM, DGN, DXF, SDTS DLG, SDTS DEM, ECW, MrSID, ESRI Shapefiles, E00, MapInfo MIF/MID, MapInfo TAB/MAP, GTOPO30, TerrainBase, SRTM, ETOPO2, ENVI DEM, JPG, PNG, BIL, BSQ, BIP, XYZ, Tiger/Line, Arc Vector Coverages, VPF (VMAP, DNC), S-57, ADRG, CADRG, CIB, JPEG2000, GIF, NOS/GEO, Garmin PCX5, GPX (GPS eXchange Format), OziExplorer WPT/PLT, Zmap Plus Grids.

Офф.сайт:_http://www.globalmapper.com
Платформа:WinAll
Lic shareware,
Линк на закачку:_http://www.globalmapper.com/global_mapper6_setup.exe

Сообщение было отредактировано Leon71: 19.10.2007 - 11:08
User is offlineProfile Card PM
Go to the top of the page
+
 
Reply to this topicStart new topic
Ответов(1 - 16)
Bish
25.11.2004 - 13:10
Сообщение #2



Visionary
Group Icon
Группа: Старейшины
Сообщений: 4982
Регистрация: 13.06.2004
Из: Россия

Пользователь №: 50472






Сообщение было отредактировано Leon71: 19.10.2007 - 10:53
User is offlineProfile Card PM
Go to the top of the page
+
Bish
25.11.2004 - 13:31
Сообщение #3



Visionary
Group Icon
Группа: Старейшины
Сообщений: 4982
Регистрация: 13.06.2004
Из: Россия

Пользователь №: 50472






Сообщение было отредактировано Leon71: 19.10.2007 - 10:53
User is offlineProfile Card PM
Go to the top of the page
+
Bish
11.12.2004 - 14:53
Сообщение #4



Visionary
Group Icon
Группа: Старейшины
Сообщений: 4982
Регистрация: 13.06.2004
Из: Россия

Пользователь №: 50472




Global Mapper 6.05


Сообщение было отредактировано Leon71: 19.10.2007 - 11:00
User is offlineProfile Card PM
Go to the top of the page
+
Bish
31.01.2005 - 22:13
Сообщение #5



Visionary
Group Icon
Группа: Старейшины
Сообщений: 4982
Регистрация: 13.06.2004
Из: Россия

Пользователь №: 50472




Global Mapper 6.06
Что нового:
Added support for exporting loaded data to a Global Mapper package file (*.gmp). These files are similar to workspace files except that the actual data is stored in the files. Package files provide an easy way to pass around lots of data between Global Mapper users with a single self-contained file. (Registered Version Only)
Added new File menu command to load all files matching a user-specified mask (or series of masks) under a selected folder on the disk. This provides an easy way to load a lot of files that are spread out in a large directory structure.
Added support for cropping raster and elevation data to a selected area feature on export. (Registered Version Only)
Added support for loading ASTER DEM and L1B imagery files in their native HDF file format.
Added the ability to load individual frame files from RPF databases like CADRG and CIB. To do this, simply select the frame(s) to load, then select that the type of the file is "Raster Product Format (CADRG/CIB) Frame" if prompted.
Added support for loading DIVA GIS grid files.
Added the ability to load Erdas Imagine .img files that contain gridded elevation data (previously they were displayed as grayscale imagery).
Made double-clicking on a feature in the Digitizer Tool bring up the edit dialog for that feature.
Added right-click option to the Digitizer tool to allow creating area features from selected line features.
Added right-click option to the Digitizer tool to allow assigning area features to be islands within other, enclosing, area features.
Made left clicking without dragging in the Grab-and-Drag controller just recenter on the clicked position.
Added option to display line feature labels directly on the line rather than offset a few pixels from it (this option is on the Line Styles tab of the Configuration dialog).
Added ability to specify a custom feature separator when exporting simple ASCII text files with vector data (File->Export Vector->Export Simple ASCII menu command). (Registered Version Only)
Added support for the Gauss Boaga (Italy) and Greek Grid projection systems.
Added support for the GGRS 1987 (Greek Grid), KKJ (Finnish Grid), and Pointe Noire 1948 (Congo) datums.
Added support for loading GNIS files with the latest column definitions and pipe-delimited files (GNIS files are available for download at http://geonames.usgs.gov/stategaz/index.html)
Enabled option to fill small gaps in data when exporting to non-elevation GeoTIFF files (it was already enabled for elevation exports). This allows gaps up to several pixels in size between or within data files being exported to be filled by interpolating nearby pixels to fill them in. (Registered Version Only)
Added option to XYZ Grid export to allow coordinate values to be saved in ECEF (Earth-Centered Earth-Fixed) coordinates. This option is for very advanced users only. (Registered Version Only)
Fixed auto-adjusting the contrast for imagery with more than about 4 billion pixels (this is only very large image files).
Fixed problem when creating DBF files with elevation attributes that have more than one digit of precision beyond the decimal point. The elevation values were getting truncated oddly in those cases. (Registered Version Only)
Made the auto-clip collar functionality work for 3.75 minute DOQs.
Made the "Use Selected Projection for All Files" checkbox appear when loading workspace files if the projection could not be automatically determined for all of the files. (Registered Version Only)
Allowed DTED files which contain unknown record types after the data and header records to be loaded.
Fixed problems loading Limits data like Anchorage areas and marine routes from DNC chart files.
Made extended note text associated with features in DNC and S-57 chart files be loaded and added as attributes.
Made auto-contrast statistics for raster data be saved in workspace files so that they do not have to be recalculated the next time the data is loaded. (Registered Version Only)
Added support for loading extremely large binary ArcGRID files that have the actual data split in to two separate files.
Corrected problems with hill shading for very large elevation files (specifically, if the sum of the squares of the pixel width and pixel height was greater than about 4 billion, the hill shading would not work properly).
Corrected registration of BIL/GridFloat data that use the XLLCORNER and YLLCORNER fields in the header file (they were stretched in the Y direction by 1 sample).
Reduced memory utilization when exporting very large or numerous ECW and/or JPEG2000 files. (Registered Version Only)
Added new parameters to the GENERATE_CONTOURS script command to allow specification of the simplification threshold to use (advanced users only) as well as the option to just generate contour lines at a single height (the contour interval value) and to turn off filling gaps in the elevation data used to generate the contours. (Registered Version Only)
Added new LAYER_DESC parameter to the IMPORT script command to allow specification of the description to use for a layer in the Overlay Control Center. (Registered Version Only)
Added support for exporting Terragen TER files with larger sizes (8197 x 8197 and 16393 x 16393). (Registered Version Only)
Allowed cancellation of running scripts and loading workspaces. (Registered Version Only)
Fixed problems with the incorrect attribute values being associated with point features in some E00 files.
Made the palette-index of the pixel under the cursor be displayed in the status bar when moving your cursor over palette-based Erdas Imagine IMG files.
Updated the UNLOAD_LAYER script command so that if an empty FILENAME parameter is provided, all layers created by the script (i.e. generated contour layers) will be unloaded. (Registered Version Only)
Added support for forward slash and backslash characters in DMS and DM coordinate strings, such as in ASCII files.
Fixed error when trying to edit a newly created attribute value when creating a new area, point, or line feature with the Digitizer Tool.
Fixed crash when rectifying BMP files.
Fixed recently introduced problem with BMP files saved from the path profile/line of sight dialog being upside down. (Registered Version Only)
Improved reprojecting and rendering of vector features in lat/lon coordinates that either cross the anti-meridian (ATM) or use non-standard longitude coordinates (i.e. longitudes from 0 to 360 rather than -180 to +180).
Added support for importing ARC entities from DXF files.

_http://www.globalmapper.com/global_mapper6_setup.exe,


Сообщение было отредактировано Leon71: 19.10.2007 - 11:01
User is offlineProfile Card PM
Go to the top of the page
+
Bish
25.03.2005 - 20:28
Сообщение #6



Visionary
Group Icon
Группа: Старейшины
Сообщений: 4982
Регистрация: 13.06.2004
Из: Россия

Пользователь №: 50472




Global Mapper 6.07
Что нового:
Replaced the help bitmap and "Click Here to Download Data" button when nothing is loaded with a set of large "Quick Start" buttons.
Added support for adding your own custom datums. Just press the "Add Datum" button on the Projection tab of the Configuration dialog to add a new datum transformation.
Added ability to modify attributes for multiple selected features using the Digitizer Tool. There is now a section on the edit dialog for working with attributes if you are editing multiple features at the same time.
Added support for loading ASPRS LIDAR LAS format files containing highly detailed elevation samples and either creating an elevation grid from them or rendering them based on their elevation using the current elevation shader.
Added support for loading ASRP (Arc Standard Raster Product) format data sets. Just load the TRANSH01.THF file to load the data.
Added support for loading ASTER L1A imagery in its native HDF format.
Added support for loading Hypack Matrix (.mtx) format elevation grid files.
Added support for loading Marplot MIE format files.
Added new option to the Batch Convert/Reproject process to allow the use of other source files specified in the batch operation to be used as filler when data is missing from the file being converted. One common use of this is for filling in the slivers that result when reprojecting data. (Registered Version Only)
Added option to select the font to use for the header and footer text used during a printout. The new default header and footer font (Times New Roman) also allows accented characters to print correctly.
Made transparency information in GIF files be used if present.
Added support for directly loading the SRTM-30+ (SRTM-30 with bathymetry and holes filled) files available at
http://topex.ucsd.edu/WWW_html/srtm30_plus.html
Added support for the Gauss Krueger Argentina and Poland 1992/19 projection systems.
Added the RGF-93 datum for use with the Lambert93 projection for France.
Added support for the Campo Inchauspe datum.
Added ability to create big endian (Motorola byte order) elevation BIL files. (Registered Version Only)
Added support for loading RPF (CADRG/CIB) files in polar zones.
Made elevation layers be stored as elevation layers in Global Mapper package files rather than being saved as 8-bit GeoTIFF images. (Registered Version Only)
Made non-default description values be stored in Global Mapper package files. (Registered Version Only)
Added support for exporting elevation data to Geosoft Grid with 16-bit integer values (previously only 32-bit floating point Geosoft Grid files could be created). (Registered Version Only)
Added right-click option to the Measure tool to allow specification that distances should always be specified in the base units of a measurement type (i.e. meters or feet) rather than rolling over to larger units like kilometers or miles for long distances.
Fixed display of large collar when zoomed out on downloaded TerraServer imagery that crossed UTM zone borders.
Added option to force dragging a square export bounds by holding down the SHIFT key when dragging an export box. (Registered Version Only)
Added support for decimal elevation precision for contour lines and spot elevations in DLG-O files.
Added support for loading Shapefiles that do not have an index (*.shx) file with them.
Added support for using an alpha channel stored in TIFF files (previously the TIFF files would load, but the alpha channel would be ignored).
When exporting Shapefiles or DBF files, made any numeric attribute values that are non-integers be stored using the floating point field type rather than the numeric field type since some software always interprets the numeric field type as integer only. (Registered Version Only)
Added support for automatically using Touratech calibration (.CAL) files when loading most imagery formats.
Fixed lockup when exporting to ECW format with some projections active. (Registered Version Only)
When performing a batch conversion, maintain the lower-case letters from the original file name (previously everything was converted to upper-case). (Registered Version Only)
Corrected calculation of view sheds where a transmission angle is used for the receiver height and earth curvature is not being ignored. (Registered Version Only)
No longer truncate attribute names to 10 characters when exporting vector features to MIF/MID format files. (Registered Version Only)
Automatically use positioning and projection information from OziExplorer .map files if present for imagery data that does not have the positioning or projection information specified in any other way.
Allowed lat/lon export bounds coordinates for the GLOBAL_BOUNDS, GLOBAL_BOUNDS_SIZE, and LAT_LON_BOUNDS parameters in script files to be specified in formats other than decimal degrees, like DMS, DM, and so on. (Registered Version Only)
Made Matlab format files be exported in the currently configured export projection rather than always exporting the coordinates as latitude/longitude values. (Registered Version Only)
Added checkbox option for most elevation grid exports to force the use of square grid cells. For Arc ASCII Grid exports this is checked by default as some applications cannot deal with Arc ASCII Grid files with non-square grid cells. (Registered Version Only)
Corrected half-pixel shift of rotated ASTER L1A/L1B imagery.
Removed change added in v6.01 to read features from the BLOCKS section of DXF files in addition to the ENTITIES section since for most files this resulted in unwanted features being loaded and apparently no other applications load features from the BLOCKS section.
Fixed problem reading azimuth angles and azimuth points for the Hotine Oblique Mercator projection from PRJ files. This problem was introduced in v6.06.
Fixed problem reading some USGS DEM files. This problem was introduced in v6.06.
Fixed occasional problem with the maximum elevation value stored for centimeter and decimeter USGS DEMs (it was one unit lower than it should have been about half of the time). (Registered Version Only)
Fixed crash loading workspace files from the command line. (Registered Version Only)
Fixed bug in view shed calculations using a transmission angle rather than a receiver height. The bug was introduced a few revisions back and basically made the receiver height be used even if the transmission angle option was selected. (Registered Version Only)
Fixed occasional odd results generating contours when the global projection is using arc second or radian units.

_http://www.globalmapper.com/global_mapper6_setup.exe


Сообщение было отредактировано Leon71: 19.10.2007 - 11:02
User is offlineProfile Card PM
Go to the top of the page
+
Bish
23.04.2005 - 20:55
Сообщение #7



Visionary
Group Icon
Группа: Старейшины
Сообщений: 4982
Регистрация: 13.06.2004
Из: Россия

Пользователь №: 50472




Global Mapper 6.08
Что нового:
Fixed TerraServer access after it was broken by changes to the teraserver-usa.com web site on April 16, 2005.
Renamed the "Pick Tool" the "Feature Info" and changed the icon to hopefully make it more obvious what the tool does.
Improved the info dialog displayed for selected features in the Feature Info Tool to display feature measurement information as well as add the ability to copy the feature information to the clipboard and edit the information.
Added ability to right click on attribute values in the Feature Info dialog displayed by the Feature Info Tool and either copy the attribute/value to the clipboard, open the value as a URL in a web browser, or open the value as a file either in Global Mapper or with Windows.
Added option to run scripts within the context of the main view window when using the File->Run Script menu command. This allows scripts to work with already loaded data and also load new data if necessary. (Registered Version Only)
Added support for loading TIFF files compressed with the ZIP (Deflate) compression method.
Only automatically use OziExplorer .map files for positioning and projection information if they were specifically created for the specified file.
Added support for loading MODIS data directly from HDF files.
Added support for loading DHM25 (Swiss elevation grid) format files.
Added support for the Swiss Grid projection.
Added support for the ETRS89 datum.
Added option to custom shaders to allow the selected color ranges to automatically be stretched to the elevation range of the loaded data to allow emulation of some of the built-in shaders like the Atlas and Color Ramp shaders.
Corrected half-pixel shift of data files placed using ERS files.
Allowed the projection to be corrected even for raster file types that don't support rectification, like ECW and MrSID.
Drastically sped up the import of some Shapefiles that had lots of polygon features with holes in them.
Drastically sped up batch conversion operations for raster files when the "Use Other Source Files As Filler" option is selected. (Registered Version Only)
When specifying custom bounds for collar clipping, added an option to initialize the lat/lon collar bounds to the lat/lon bounds of the currently selected area feature.
Added support for loading track lines from OziExplorer PLT files when the PLT file does not specify the number of points in the track line.
Store additional precision for some attributes in PRJ files.
When loading GeoTIFF and ECW files that have projection information specified in their header, check for a PRJ file to see if a more specific datum is specified than the one specified in the image header (i.e. NAD27 (Canada) rather than just NAD27).
Do not write out a vertical datum field to elevation GeoTIFF files. Previously, a vertical datum key was written out with a vertical datum of NAVD29 even though Global Mapper actually did not know what the vertical datum was. (Registered Version Only)
Reduced memory usage of most types of vector data from 25-50%.
Allowed ECW files to be loaded from .tar.gz and .zip archives.
Added support for additional datums being read from and saved to ECW files.
Improved saving of some state plane projections to ECW files. (Registered Version Only)
Made SPLINE entities be loaded from DXF files.
Don't include spline control points when loading POLYLINE entities from DXF files.
When loading DXF files, any INSERT entities that are just block references will no longer be loaded as separate point features.
When loading DXF files, any features with a layer marked as frozen will be marked as deleted upon import. Display of these features could then be re-enabled by enabling the display of deleted features on the Vector Display tab of the Configuration dialog.
Fixed saving of holes (islands) in area features to Global Mapper package files. They were being changed into their own parent areas rather than remaining holes. (Registered Version Only)
Fixed bug in v6.07 release that caused elevation values to be incorrectly stored as "0" in exported MIF/MID files. (Registered Version Only)


_http://www.globalmapper.com/global_mapper6_setup.exe,


Сообщение было отредактировано Leon71: 19.10.2007 - 11:03
User is offlineProfile Card PM
Go to the top of the page
+
Bish
15.06.2005 - 00:19
Сообщение #8



Visionary
Group Icon
Группа: Старейшины
Сообщений: 4982
Регистрация: 13.06.2004
Из: Россия

Пользователь №: 50472




Global Mapper 6.09
Что нового:
Replaced the existing 3D viewer with a new one that should work better across all systems. It also displays higher resolution terrains, displays all of the data that is displayed in the main Global Mapper view, and can export to additional formats like PNG, JPG, and TIFF. (Registered Version Only)
Added support for exporting loaded data to PNG format files. (Registered Version Only)
Added support for loading Lowrance USR format files.
Added support for exporting gridded elevation data to the new, highly compressed, Global Mapper Grid format. (Registered Version Only)
Made holding down the middle mouse button and dragging the mouse when the zoom tool is active drag the map just like the Grab-and-Drag tool does.
Add the ability to modify view sheds after they have been calculated. To do so, simply open the Overlay Control Center, right click on the view shed layer that you want to modify, then select the "Edit View Shed Parameters and Recalculate" option. (Registered Version Only)
On the image rectification dialog, made the selected control point be displayed with a yellow X rather than a red X.
On the image rectification dialog, added an option (enabled by default) to display the labels for ground controls points on the zoomed and reference map views.
On the image rectification dialog, if you hold down the CTRL key when left clicking in either the zoomed or reference map view, it will cause the other of those windows to be recentered on the clicked location if enough information is available to determine a recenter location.
Added button to most of the raster and elevation export option dialogs to allow specifying the sample spacing value in units other than the currently selected global units. (Registered Version Only)
Added support for tracking GPS devices on serial ports COM10 and higher.
Added support for decoding Lambert Conformal Conic, Lambert Azimuthal, Albers Conic, and Mercator projections from BSB files to allow for better positioning when not many tie points are specified in the BSB/KAP file.
Added support for loading additional flavors of ASTER and MODIS imagery directly from HDF files.
Added support for nautical miles as a linear unit.
Added support for the NTF France datum with the Pantheon in Paris as the prime meridian.
Added support for the Interrupted Goode Homolosine projection.
Made grid line labels always draw at the edge of the screen.
Added batch convert/reproject option to crop to the selected area features when exporting to raster and elevation formats. (Registered Version Only)
Added option to display the elevation legend on the right side of the display window (just right click on the elevation legend to choose where it is displayed).
Added new right click option in the Digitizer tool to allow adding and/or updating the measurement attributes (i.e. LENGTH for lines and PERIMETER/ENCLOSED_AREA for areas) of the selected features.
When exporting area features to Shapefiles, make the area features be properly clipped to the export bounds rather than just including in its entirety any area that intersects the export bounds. (Registered Version Only)
When exporting area features to SVG files, make the area features be properly clipped to the export bounds rather than just including in its entirety any area that intersects the export bounds. (Registered Version Only)
Made point symbols be exported to SVG files. (Registered Version Only)
Added option to generate tab-delimited CSV files. (Registered Version Only)
Made curved line segments be correctly read from DXF files.
Added support for CMYK-encoded JPG files.
Allowed for the specification of positions in MGRS coordinates when manually entering a location, such as when positioning vertices or panning to a particular location.
Allowed multiple attribute/value pairs to be deleted at the same time when editing an area, line, or point feature.
Added button to the Feature Info dialog to allow selected features to be deleted in the Feature Info tool.
Allowed cropping to more than one area when exporting to a selected area feature from the Export Bounds tab of the raster and elevation export options. (Registered Version Only)
Added new parameter (POLYGON_CROP_FILE) to the EXPORT_RASTER and EXPORT_ELEVATION commands in the scripting language to allow raster and elevation exports to be cropped to a polygon. The file specified must consist of a single area feature to which the data will be cropped. (Registered Version Only)
When specifying custom bounds for collar clipping, if more than one area is selected with the Digitizer Tool, use the combined lat/lon bounds of all selected areas rather than requiring that only one area be selected.
Added option when exporting GeoTIFF files to specify a DPI value to be stored in the TIFF file for use by other applications. (Registered Version Only)
Added option to the GPS Setup dialog to allow reading a NMEA stream from a file.
Fixed reading of some ASRP data sets.
Fixed reading of some VPF data sets, in particular the Urban Area level VMAP data.
Allowed for loading of SHP files with invalid or corrupt SHX files.
Changed the default export extension for Arc ASCII Grid files to .asc from .grd since ArcGIS 9 only recognizes the .asc and .txt extensions. (Registered Version Only)
Made grid lines be displayed on the reference image when rectifying data if grid line display is enabled in the main map view. (Registered Version Only)
Made batch conversions to Surfer BLN format files actually do something. (Registered Version Only)
Corrected coloring of the first and last vertex for area features. Also, if the start and end vertices for a line or area are the same, the start vertex is drawn green slightly larger than the end vertex in red so that it will be visible.
Made the start and end vertices for selected line and area features be colored green and red when highlighted with the Feature Info tool. Previously the endpoint colors were only changed when selected with the Digitizer Tool.
Restored "Script Processing COMPLETED" message to end of script status when running a script from the File->Run Script menu command. This was inadvertently removed in the v6.08 release. (Registered Version Only)
Sped up loading of workspaces with lots of files by deferring all drawing until the entire workspace is loaded. Previously with some file types the main view would be redrawn after each file was loaded, which really slowed things down. (Registered Version Only)
Added display of the complete filename for raster and elevation data in the Metadata dialog displayed from the Overlay Control Center.
Made transparent colors work with 16-bit per color channel imagery with auto-adjusted contrast.
If position information for an imagery file is provided via a world file, any rotation factor within the world file is now used rather than ignored. Previously, only TIFF files would use rotation factors from world files. Now they will be used for all imagery types (i.e. JPG, BMP, PNG, etc.).
Added Yes/No/All prompt for elevation vs. imagery TIFF files when the type cannot be automatically determined. This makes batch converting and loading these types of files much less of a hassle.
Added sample format tag to 32-bit elevation GeoTIFF files created by Global Mapper so that other software packages can correctly interpret the elevation samples as floating point rather than integer values. (Registered Version Only)
Added option to create 32-bit floating point BT (Binary Terrain) files when exporting BT files from Global Mapper. (Registered Version Only)
Made custom datum names stored in PRJ files be recognized.
Fixed problem setting the collar crop bounds from a selected area if the current view datum did not match the datum of the layer to be cropped.
Corrected detection of UTM zones in the southern hemisphere when reading projections from TXT metadata files.
Corrected display of interlaced GIF files.
Greatly sped up the load of very large USGS DEM format files.
Improved parsing of MGRS coordinates to allow for coordinate strings with no spaces.
Corrected half-sample shift of Helava DEM files.
Use registration points from ERS files if provided.
Dramatically reduced the memory usage when loading hundreds or thousands of gridded elevation files. (Registered Version Only)
Fixed handling of negative and NULL values in DTED files.
Fixed error message when trying to display the 3D view with no data loaded. (Registered Version Only)
Corrected reading of negative heights from one-byte per sample elevation BIL files.
Fixed reading of state plane zones from projection files that use FIPSZONE rather than ZONE to specify the zone number.
Corrected problem that in rare circumstances caused one pixel column or row to be left off of Arc Binary Grid files.
Added support for correctly positioning Arc ASCII Grid files that use XLLCENTER and YLLCENTER rather than XLLCORNER and YLLCORNER for their positioning info.
Fixed up to one pixel shift in both the X and Y directions when viewing MrSID imagery. Exporting from MrSID files had no shift.
Renamed the "Geodetic Datum 1949" to the "NZGD49" datum and improved the accuracy of translating from it to other datums.
Made ECW files use projection information from Ozi .map files if the projection information cannot be otherwise determined automatically.
Fixed rare view shed problem that caused less view shed points to be visible than should be. This primarily affected only affected view sheds calculated with very large sample spacings. (Registered Version Only)
Fixed exporting of State Plane projections to MapInfo MIF/MID format files. (Registered Version Only)
Improved the quality of viewed ECW files so that you don't have to zoom in quite so far to see high detail.
Added support for loading ADRG and ASRP data sets in polar zones.

_http://www.globalmapper.com/global_mapper6_setup.exe,


Сообщение было отредактировано Leon71: 19.10.2007 - 11:04
User is offlineProfile Card PM
Go to the top of the page
+
Bish
6.08.2005 - 07:03
Сообщение #9



Visionary
Group Icon
Группа: Старейшины
Сообщений: 4982
Регистрация: 13.06.2004
Из: Россия

Пользователь №: 50472




Global Mapper 7.0
Что нового:
Added support for grouping collections of map files together into a "map catalog". Map catalogs allow you to easily load, view, and manage large collections of data without using too much system memory. (Registered Version Only)
Added support for tracking real-time GPS locations from Garmin USB GPS devices.
Added option under the Search menu to allow searching loaded vector data on the name, description, or attribute values. The searching allows both text and numeric comparisons in the search criteria. Features can be edited and deleted directly from the search results.
Added "Gridding" tab to most exports to allow splitting up the data into regularly spaced tiles on export if desired rather than just exporting a single file. (Registered Version Only)
Added support for calculating "cut-and-fill" volumes within area measurements and along linear measurements using the Measure Tool (right click to see the Calculate Volumes option). (Registered Version Only)
Made the bearing from the start to the end of line features be added when creating new lines using either the Measure tool or the Digitizer tool.
Added ability to easily create rectangular, square, circular, elliptical, circular arc, and elliptical arc area and line feature using the Digitizer Tool. There are additional items on the right click popup menu for drawing these shapes.
Added option to create concentric range rings (i.e. circles of a given radius) on the right-click menu in the Digitizer Tool.
Added an option when editing vector features with the Digitizer Tool to add file link attributes by selecting files rather than manually typing the file names.
Made area features selected with the Digitizer Tool be drawn in their normal style during exports cropped to the selected area feature(s).
Made point feature labels be displayed even if the points are selected with the Digitizer Tool.
Added support for calculating "cut-and-fill" volumes along a path profile using the 3D Path Profile/Line of Sight Tool. (Registered Version Only)
Added additional menus to the 3D Path Profile dialog to provide easier access to some of the options. Also made the path details be copied to the clipboard when displayed.
Added additional options to the 3D Path Profile dialog for controlling the from/to position display format and the coloring and style of the profile elements.
Fixed problems with the path profile tool when the loaded data is not correctly projected (i.e. the lat/lon readout in the status bar reads that the coordinates could not be determined).
Made elevation values saved to XYZ files from the path profile dialog have 2 digits after the decimal place rather than 1. (Registered Version Only)
In the 3D viewer, allow the vertical exaggeration to be increased all the way to a factor of 100.0 rather than just 20.0. (Registered Version Only)
In the 3D viewer, made the Panorama/Walk mode toolbar button act as a mode just like the Rotate, Move, and Zoom buttons since that is how it behaves. (Registered Version Only)
In the 3D viewer, added an option to the Properties dialog to allow the background color to be changed. (Registered Version Only)
In the 3D viewer, added an option to the Properties dialog to allow the height used in the Panorama/Walk mode to be manually set and to also specify whether the height should be a constant height relative to the ground or a constant height relative to sea level. (Registered Version Only)
In the 3D viewer, made the vertical exaggeration and background color settings be remembered between instances of running the software. (Registered Version Only)
Added option to the Batch Convert/Reproject dialog to allow the specification of an additional string to append to the names of the files created during the batch convert process. (Registered Version Only)
Added option to the Batch Convert/Reproject dialog to allow some files to only be used as filler for other files. To mark files this way, simply right click on them in the source files list and select the option to just use them as filler files. (Registered Version Only)
Added option to create 1-bit black-and-white GeoTIFF files with the Batch Converter. (Registered Version Only)
Reduced memory requirements during batch conversion when using all loaded files as filler data and there are lots of files being converted. (Registered Version Only)
When shift-clicking in the Reference pane of the image rectification dialog, made the selected coordinates be rounded to the nearest minute for lat/lon values and the nearest 1000 units for other projections.
Made the image rectification dialog start out maximized if the dialog was maximized the last time the user closed the dialog.
Made the Latitude and Longitude coordinate values in the ground control point list of the image rectification dialog be displayed using the current Position Display Format selection in the Configuration dialog.
When double clicking on a control point in the control point list in the image rectification dialog and the rectify coordinates are lat/lon values, format the projected X and Y coordinate fields using the current Position Display Format from the Configuration dialog.
While Shift-clicking in the Zoomed view in the image rectification dialog, automatically add the control point to the control point list use the clicked location.
When Ctrl clicking in the Entire Image view in the image rectification dialog, automatically recenter the Reference view if there are enough control points entered to convert the clicked coordinates to a ground coordinate.
Make layers that are hidden in the Overlay Control Center still be rendered in the rectify window when re-positioning that layer.
Added support for using the bounds of a loaded layer when exporting or performing other operations that require bounds in a script file. The LAYER_BOUNDS parameter has been added to several script commands to support this. (Registered Version Only)
Added ONLY_GENERATE_METADATA parameter to the EXPORT_RASTER script command to allow scripts to just create the metadata files like world files and TAB files when exporting GeoTIFF, JPG, and PNG files rather than doing a full export. (Registered Version Only)
Made workspace files support relative filenames, allowing data referenced by workspace files to be moved so long as the workspace file is moved as well. (Registered Version Only)
Added option to Terragen .ter file export to allow the creating of non-square terrain files. This files should work with Terragen 0.9.x and later. (Registered Version Only)
Added option to create area features from the bounds of the selected layer in the Overlay Control Center by selecting and then right-clicking on the layers that you want to create the bounds from.
Added support for loading data in the GPS TrackMaker (.gtm) format.
Added support for the Bonne and Cassini-Soldner projections.
Added support for non-zero central meridians when using the Gall Stereographic projection.
Added support for the Hartbeesthoek94 datum.
Added support for loading DTED files that have HDR and/or VOL records at the beginning.
Added support for loading ASTER HDF files with .hdf0 and .hdf1 extensions as well as additional variations of ASTER SWIR data.
Fixed export of high-color (24-bit and above) and 8-bit grayscale TIFF files to image-optimized palette-based TIFF and PNG formats when the TIFF file incorrectly specifies that it is grayscale and not RGB. (Registered Version Only)
Sped up display of TerraServer data that crosses UTM zone boundaries.
Added support for finding world files with a .wld extension when loading most imagery formats (i.e. BMP, JPG, TIFF, GIF, and PNG).
Corrected placement of Hawaiian data loaded from Tiger files (the NAD83 datum was being used rather than Old Hawaiian Mean).
Made the size of the feature info dialog be saved between sessions.
Fixed decoding of State Plane projections from new format PRJ files. The problem was introduced in the v6.09 release and made some PRJ files with State Plane projections decode the projection into the core projection rather than keeping it as State Plane. This should not have affected any coordinates.
Corrected incorrect interpretation of "Foot" string from new format PRJ files. Previously this was interpreted as US Survey Feet when it should have been interpreted as International Feet.
Fixed application crash loading some slightly odd .zip files.
Made additional digits of precision be stored for settings like custom grid spacing.
Manually compute the min/max sample values for USGS DEMs that have a non-unity Z resolution since they are often stored incorrectly, resulting in odd shading in Global Mapper. This will apply to things like decimeter and centimeter DEMs.
Made full extents of polar data reprojected from a polar stereographic projection to another projection be displayed whenever possible (previously the part nearest the pole and near the anti-meridian could get clipped off).
Increased the maximum number of grid lines that could be displayed when using the custom grid spacing setting.
Made TIFF files that use a transformation matrix for position information be automatically positioned rather than requiring rectification.
Made degree symbols display correctly on Asian versions of Windows.
Corrected drawing and zooming in on ECW and JPEG2000 files that have flipped Y coordinate values in the header.
Added option to contour generation to control whether or not small gaps in the data are filled (previously they always were).
Improved the speed of exporting downloaded TerraServer data to new raster files. (Registered Version Only)
Corrected display of zone numbers for Gauss Krueger Germany projection.
Only show the warning message about user-defined datums in GeoTIFF files being interpreted as WGS84 once each session.
When changing the current view projection, maintain the current view window if possible rather than zooming out to all loaded data.
Added option to initialize sample spacing values to the current screen sample spacing from the dialog allowing specification of sample spacing in units other than the current projection units when performing raster and elevation exports.
Added red, blue, green, and white dot symbols.


_http://www.globalmapper.com/global_mapper7_setup.exe,


Сообщение было отредактировано Leon71: 19.10.2007 - 11:04
User is offlineProfile Card PM
Go to the top of the page
+
Bish
12.10.2005 - 19:52
Сообщение #10



Visionary
Group Icon
Группа: Старейшины
Сообщений: 4982
Регистрация: 13.06.2004
Из: Россия

Пользователь №: 50472




Global Mapper 7.01
Что нового:
Made the middle mouse button drag the map in all of the tools and not just the Zoom tool.
Added option to use an elevation shader other than the shared elevation shader selected on the toolbar for rendering an elevation layer. This option is available from the Options button in the Overlay Control Center.
Added option to grid (i.e. tile) data during batch conversion. (Registered Version Only)
Made decimal digit fields exported to Shapefiles display as decimal numbers by default when loaded into other applications rather than displaying just as whole numbers. (Registered Version Only)
Added and/or improved metadata display from the Overlay Control Center for most file types. The improved metadata display allows copying the metadata to the clipboard and easy viewing of projection information.
Added support for the NAD83 HARN/HPGN datums.
Improved accuracy of NAD27 Alaska, Old Hawaiian Mean, and Puerto Rico datums by adding support for using the NADCON datum conversion methods for those datums.
Improved accuracy of NTF France datums by adding support for using variable grid shifts depending on the location within France.
Added support for creating custom datums that use the 7-parameter Bursa-Wolfe datum transformation method (previously only the 3-parameter Molodensky method was supported).
Added built-in support for the Irish Grid projection.
Added support for yards as a linear unit.
Added support for millimeters as an elevation unit.
Corrected detection of UTM zones in the Southern Hemisphere from old-format ESRI PRJ files.
Improved decoding of some projections from OziExplorer .map files.
Added support for loading NTF-format grid files, such as those used for elevation data in Great Britain.
Added support for loading some FAST format imagery files, such as those used for L7A Landsat data in some parts of the world.
Made holding the X and Y keys when moving vertices or features with the Digitizer Tool, clamp the move horizontally or vertically.
When creating new line or area features with the Digitizer Tool, the length and enclosed area (if applicable) will be displayed in the status bar as the new feature is drawn.
When moving or joining vertices of line or area features with the Digitizer Tool, the length and enclosed area (if applicable) will be displayed in the status bar as the vertices are moved.
When creating a new line feature from a measurement in the Measure Tool, set the length of the measurement to also be the default display label.
When displaying length and other measurement strings, such as with the Measure Tool, remove any trailing zeroes from the length to make it more compact.
Added new hotkeys to the image rectification dialog. Now Alt+R will act like pressing the "Update Selected GCP" button, Alt+Q will move the GCP list selection up, and Alt+Z will move the GCP list selection down.
Improved the crosshair cursor used in the Zoomed and Reference views of the Image Rectification dialog.
Improved the symbols used in the image rectification dialog for displaying ground control points to make it easier to see the data behind the control point.
Added the ability to display metadata about maps in a map catalog by right-clicking on the map in the map list in the Map Catalog dialog and selecting a popup menu option to display metadata about them. (Registered Version Only)
Added the ability to have map catalogs be displayed within a range of map scales. (Registered Version Only)
Fixed problems using files with Oblique Mercator projections in map catalogs. (Registered Version Only)
Fixed problems with some files, particular packages with multiple data layer, being included in map catalogs. (Registered Version Only)
Corrected placement of Erdas Imagine .img files with a UTM projection in the Southern Hemisphere.
Added support for getting projection information for MrSID files from .aux files.
Added option to generate world files when exporting to BIL/BIP/BSQ format files. While the information in the world files is also in the .HDR file generated, some software only checks for a world file. By default, both will be generated. (Registered Version Only)
Added support for loading JPG files directly from .zip and .tar.gz archives.
Fixed loading of some Raster Product Format (RPF) data, like CADRG/CIB data, that had odd security descriptor values in the frame files.
Display a progress dialog when printing to show the progress of generating the high-resolution image to send to the printer.
Drastically sped up the export of BMP files when capturing the screen to one or printing to one. (Registered Version Only)
Made zooming the main map view with the mouse wheel only zoom half as far as the zoom buttons on the toolbar.
Fixed problems introduced in the v7.00 release with calculating view sheds when the global projection units are either arc seconds or radians. (Registered Version Only)
Made the feature type lists on the Generic ASCII Import dialog be sorted alphabetically.
If the datum can not be determined from a GeoTIFF file, ask the user to confirm it if we can't determine the datum from some other source rather than just assuming the datum is WGS84.
Added ability to generate black-and-white GeoTIFF files that use black for the minimum value rather than white. To do this, select the Grayscale - Min Is Black palette option when exporting a black-and-white GeoTIFF file. (Registered Version Only)
Made auto-collar cropping work correctly for 1:63K scale Alaska DRGs.
Improved dialog that appears when TerraServer connections fail.
Made point features with labels be exported as TEXT entities to DXF files rather than either being split up into separate POINT and TEXT entities or being created as a POINT entity with attributes. (Registered Version Only)
Improved display of elevation lines in the path profile dialog when the elevation range is small.
Fixed problems with the wrong font being displayed when editing custom area, line, and point types from the Configuration dialog.
Corrected datum used for VPF (e.g. VMAP, DNC) data. NAD83 was being used when it should have been WGS84. There was no position error however as those datums are the same positionally.
Fixed problem with the zoom scale changing after a print preview.
Fixed problem with grid lines not being saved to raster files or printed if no other vector data is loaded.
Allowed correct loading of elevation TIFF files that don't correctly specify their min/max elevation range.
Added option to clamp values outside the valid elevation range to the specified elevation range when modifying the valid elevation range of a layer from the Options button in the Overlay Control Center.
Added support for loading large TIFF files with YCBCR-encoding (usually JPEG-in-TIFF files).
When loading ECW and JPEG2000 files with apparently flipped Y coordinates, made it optional to flip the image vertically since it some cases that is not correct.
Added new red and yellow diagonal crosshair symbols.
When saving PRJ and world file names (e.g. .tfw, .jgw), use lower case to make it easier to use these files on platforms that are case-sensitive, like Linux. (Registered Version Only)
Made true 3D DXF polylines be generated when exported 3D line features (such as those from XYZ files) to DXF files. (Registered Version Only)
Made features from Tiger/Line files include the CFCC (census feature class code) as an attribute of the feature if available.
Improved generation of range rings to always use a great-circle distance method if possible, even if the current projection is not Geographic.
Added support for automatically positioning imagery using ASTER browse .meta files.

_http://www.globalmapper.com/global_mapper7_setup.exe,


Сообщение было отредактировано Leon71: 19.10.2007 - 11:06
User is offlineProfile Card PM
Go to the top of the page
+
Bish
3.12.2005 - 02:29
Сообщение #11



Visionary
Group Icon
Группа: Старейшины
Сообщений: 4982
Регистрация: 13.06.2004
Из: Россия

Пользователь №: 50472




Global Mapper v7.02
Что нового:
Added option on Vector Display tab of the Configuration dialog to allow more control over the order that vector features are drawn in. You can now select to have the layer order in the Overlay Control Center take top priority for vector data, allowing vector layers to be drawn under raster layers and also allowing explicit forcing of vector layer draw order.
Added support for searching on address in the US under the Search menu.
Added option to download TerraServer data near an address.
Made transparency and translucency in PNG files be used.
Added support for creating transparent PNG files (this is now the default). (Registered Version Only)
Improved ease of digitizing lots of area, line, and point features by making the Digitizer Tool stay in the creation mode after creating a feature rather than forcing you to re-select the feature type to create each time. You still just need to right-click to cancel the current operation.
Added display of the number of points digitized so far when drawing a new line or area feature with the Digitizer Tool.
Added option to reverse the order of the vertices in selected line features using the Digitizer Tool.
Added option to find unconnected endpoints in selected lines with the Digitizer Tool. This provides an easy method of identifying connectivity problems in loaded data.
Fixed creation of duplicate attributes when editing multiple features at a time with the Digitizer Tool and adding a new attribute which already exists in some of the features being edited.
Added option to measure cut-and-fill volumes to the right-click menu when a single line or area feature is selected in the Digitizer Tool.
Added support for exporting loaded vector data to Lowrance USR format files for use in Lowrance GPS devices. (Registered Version Only)
Added support for loading LIDAR data from TerraScan .bin and .ts format files. (Registered Version Only)
Added option to print to (Geo)TIFF format files. (Registered Version Only)
Added ability to batch convert to Global Mapper Package files. (Registered Version Only)
Added support for exporting loaded elevation data to Optimi Terrain format files. (Registered Version Only)
Vastly improved accuracy of RT90 (Sweden) datum transformations.
Added Indonesia 1974 and Bukit Rimpah datums.
Added support for using the French angular unit "grades" with the Geographic projection.
Fixed rare problems projecting between a State Plane projection and a Lambert Conformal Conic projection.
Fixed loading of Erdas Imagine .img files with embedded projection information. This was broken in the v7.01 release.
Added support for loading and saving Southern Transverse Mercator projections in ECW files.
Added support for using projection and positioning information from .TAB files for ECW files.
Added support for decoding New Zealand Map Grid projections from .TAB files.
Added option to write an invalid datum code to DEM files when exporting with a view/export datum set to one that is not supported by the DEM format. (Registered Version Only)
Do not allow modifying the Origin Latitude for Mercator projections since it is not used (the latitude origin is always the equator for Mercator).
Fixed saving of some projections to MapInfo TAB files. Some projections either could not be written at all or if they had a central meridian scale factor parameter it would always be set to 1.0. (Registered Version Only)
Made projection information from supplemental files (like .prj files) be used if available for GeoTIFF files that do not contain projection information internally rather than always asking the user to select the projection in that case.
Added GRS 1967 (Indonesia 1974), Sphere Radius 6378388 Meters, and War Office (McCaw 1924) as available ellipsoids for adding custom datums.
Fixed name of the "Everest 1830" ellipsoid in the custom datum dialog. It was being incorrectly listed as "Everest 1930".
Made Ctrl+Right Click in the Zoom Tool restore the last zoom scale.
Made the name of the map that a vector feature is in always be displayed in the Feature Info dialog for the feature.
Added button on the General tab of the Configuration dialog to allow restoring all settings to their default values.
Added support for tracking GPS devices on COM ports up to COM64 (previously the highest support serial port was COM16).
Made the COM port and baud rate settings for serial GPS devices be properly remembered between sessions.
Added shortcut key (Ctrl+T) for starting and stopping the tracking of a connected GPS device.
Made font information about labeled features be saved in Simple ASCII Text files exported with the "include attributes" option set. (Registered Version Only)
Added support for using new font attributes when reading generic ASCII text files. See the User's Manual section for that menu command for details on the new supported attributes.
Added ability to combine line features in the Search by Attributes dialog. Just select the lines to combine, then right click on them in the list and select the combine option that appears.
Fixed errors loading label points from some .e00 files.
Added support for rectifying ECW and JPG2000 files.
Added support for loading TAB-referenced raster files which do not have the same base name as the TAB file. You must select the TAB file to load for this to work.
If a color palette is specified in a TIFF header for files with a grayscale photometric interpretation, use the color palette rather than creating a grayscale one. Apparently some products, like ArcGIS, will create TIFF files in this way for some reason.
Made TEXT feature labels from MIF/MID files be read in and used.
Made saving a path profile to a BMP file save a bottom-up rather than a top-down bitmap since some applications (including Global Mapper) can't read top-down bitmaps. (Registered Version Only)
Fixed problems batch converting to Shapefile format and exporting to the "source file" folder when the input files are either archives (e.g. .zip or .tar.gz files) or the output is being gridded. (Registered Version Only)
When using the "Add Loaded Files" or "Add Onscreen Files" buttons in the batch conversion dialog and map catalog files are loaded, made the maps referenced by the map catalog be added to the convert list if they are of the right type. (Registered Version Only)
Fixed loading of attributes from some DBF files that had padding bytes after the DBF header.
Added support for decoding DMS lat/lon values which use a hyphen as the separator.
Sped up the export of raster and elevation files when only a subset of a large number of files is being exported. (Registered Version Only)
Fixed really slow drawing of some rotated BSB files.
Fixed vertical flip of NTF-format grid files.
When exporting MapInfo MIF/MID format files, made area features be fully cropped to the specified export bounds rather than just exporting in whole any area that intersects the export bounds. (Registered Version Only)
Made line and area border widths be stored correctly in MapInfo MIF/MID files. (Registered Version Only)
When using area features with elevations as obstructions for view shed calculations, make the tested receiver heights inside area features just be based on the terrain and only use the area heights as obstructions. This makes it easier to simulate things like wooded areas blocking reception within those areas and not just beyond them. (Registered Version Only)
Added Landsat True Color links from resmap.com to the File->Open ECW File from the Web menu dialog.
Added support for reading in 3D DXF line features and saving the separate elevations for each vertex rather than using the elevation of the first vertex for the entire line.
Added ability to create regularly spaced tiles of elevation grids from 3D vector data when right-clicking on vector layers in the Overlay Control Center and selecting the option to create an elevation grid from the data. This makes it easier to deal with very large data sets that cannot be gridded all at once without running out of memory.
Added support for Global Mapper Package files larger than 2GB in size.

_http://www.globalmapper.com/global_mapper7_setup.exe,


Сообщение было отредактировано Leon71: 19.10.2007 - 11:05
User is offlineProfile Card PM
Go to the top of the page
+
Yuruy
5.12.2005 - 09:41
Сообщение #12



SEARCHER
Group Icon
Группа: Модераторы
Сообщений: 1276
Регистрация: 23.12.2002

Пользователь №: 4030






Сообщение было отредактировано Leon71: 19.10.2007 - 11:05
User is offlineProfile Card PM
Go to the top of the page
+
Bish
16.02.2006 - 15:33
Сообщение #13



Visionary
Group Icon
Группа: Старейшины
Сообщений: 4982
Регистрация: 13.06.2004
Из: Россия

Пользователь №: 50472




Global Mapper v7.03
Что нового:
- Added support for loading DGN v8 and later format files.
- Added support for loading MapTech format files, including encrypted BSB files and other MapTech topographic maps and aerial navigation maps.
- Added support for loading Idrisi format raster and elevation files.
- Added support for exporting loaded vector data to DGN format files. (Registered Version Only)
- Added support for exporting loaded data to Erdas Imagine IMG format files. (Registered Version Only)
- Added support for exporting loaded data Idrisi format files. (Registered Version Only)
- Added support for exporting 8-bit and RGB GeoTIFF files with LZW compression. LZW compression typically results in much better compression that the default methods, but may not be supported by all software applications. (Registered Version Only)
- Significantly improved the display of raster and gridded elevation data at intermediate zoom levels by always anti-aliasing the display when not zoomed into the pixel level of the data and not zoomed out so far that it doesn't matter much. There will be a slight performance hit for this, but the improvement in display quality seems worth it.
- Made pressing the ESC key during a draw abort the draw as soon as possible.
- Improved accuracy of the NAD27 (Canada), AGD66, AGD84, and NZGD49 datums by using the NTv2 grid shift method for sub-meter datum transformation accuracy.
- Added generic NAD27 datum that will automatically use the most accurate local datum conversion based on the location being converted.
- Added support for the Miller Oblated Stereographic projection.
- Allowed use of the NZGD2000 datum with the New Zealand Map Grid projection.
- Made additional datum codes, like those for the NTF datums, be recognized for GeoTIFF files.
- Made ETRS89 datum be recognized in additional spellings from PRJ files.
- Corrected small error when transforming the Rome 1940 datum to other datums. format files.
- Added Clarke 1880 (Benoit) as an available ellipsoid for adding custom datums.
- Added option to the view shed tool to find a view shed of just where a beam will hit the terrain. A start and end transmission angle are specified in addition to the transmitter height in order to find the beam intersection points. (Registered Version Only)
- Added option to the view shed tool to specify a minimum distance from the transmitter to perform the view shed analysis. projection. (Registered Version Only)
- Improved loading of DXF files that have features in the BLOCKS section of the file.
- Prompt users to unload all loaded data when loading workspace files rather than automatically unloading all loaded data. (Registered Version Only)
- Added option to batch geocode addresses from a file from the Search->Find Address menu command. (Registered Version Only)
- Added support for gridding the export of Simple ASCII Text, VRML, and Zmap Plus Grid files. (Registered Version Only)
- Added support for reversing the order in which rows and columns are named when gridding files on export. (Registered Version Only)
- Made the path profile/line of sight dialog maintain its size between showings, preventing the user from having to continually resize it to get the size they want for different path profiles.
- Added option to the Vector Display tab of the Configuration dialog to allow an arrow to be drawn along line features in the direction that they travel.
- Fixed scaling problem when exporting vector data to a raster file using the EXPORT_RASTER command from a script file. (Registered Version Only)
- Made custom symbols from .ico files draw in their actual size instead of always using the default system size of 32x32.
- Added new built-in point symbol, "Dot - Yellow".
- Fixed problems loading some GPS TrackMaker files that have no waypoints in them.
- Made degree symbols display correctly on Asian versions of Windows that weren't fixed in the earlier update.
- Fixed problems with render progress on status bar not working properly with map catalog files.
- Fixed problems with some maps that result in multiple layers, like ADRG files, in map catalogs.
- Allowed custom per-layer shaders to work properly with map catalogs containing elevation data.
- Fixed problems with some iso-height area contours not being generated in some rare cases when generating contours.
- Fixed loading of package files containing elevation data from workspaces. (Registered Version Only)
- Fixed occasional problems with missing outer row and/or column of data when exporting a raster or elevation file and cropping to a selected, rectangular area feature. (Registered Version Only)
- Fixed problems with elevation shading and display of the elevation legend when negative scaling factors are used on the Alter Elevations dialog.
- Made up to 3 decimal digits of precision be used when saving elevation values to many ASCII formats. (Registered Version Only)
- Added option to remove archive files (like .zip and .tar.gz) from the list of files to batch convert/reproject by right-clicking on the batch convert file list and selecting the appropriate option. (Registered Version Only)
- Added option to add files to the list of files to batch convert/reproject from a text file containing a list of full paths to files. To access this option, simply right click on the file list in the Batch Convert/Reproject dialog and select the appropriate option. (Registered Version Only)
- Added option to add files to a map catalog from a text file containing a list of full paths to files. To access this option, simply right click on the map list in the Map Catalog dialog and select the appropriate option. (Registered Version Only)
- Corrected half-pixel offset in placement of MrSID files with embedded coordinate information.
- When exporting Shapefiles, do not export line features that are at a point (all vertices coincident) or area features that are a point or a 2-vertex line. (Registered Version Only)
- When exporting Shapefiles, make sure that lines that get cropped to the export bounds maintain their original direction. (Registered Version Only)
Made attributes for which none of the features being exported have a non-empty value still be exported to DBF files that are created with Shapefiles. (Registered Version Only)
- Allowed confirmation prompt when closing loaded overlays from the Overlay Control Center to be disabled so that it won't be shown again.
- Fixed out of memory errors when zoomed in really far on some MrSID files.
- Fixed loading of E00 files with empty annotations.
- Made deleted holes in area features not be exported to DLG-O format files. (Registered Version Only)
- Added support for tracking NMEA GPS devices that use $EC* sentences rather than $GP* sentences.
- Fixed determination of State Plane projection from Erdas Imagine .img files that use a negative zone number in the header.
- Fixed problem with STL, 3D DXF mesh, and 3D DXF mesh exports that would cause a one sample gap between gridded files when exported. (Registered Version Only)
- Added right-click option to the Search by Attributes dialog to allow selecting all search results.
- Made files opened by dragging them onto Global Mapper be added to the list of recently used files under the File menu.
- When dragging multiple files onto Global Mapper to load them, make the "Use Selected Projection for All" checkbox option work if the user is asked for a projection.
- Added a registry key to allow overriding where temporary files, like extracted archive contents and downloaded TerraServer tiles, are stored. If you create a HKEY_CURRENT_USER\Software\GlobalMapper\TempDir string value with the folder that you want the temporary files to be based in, that folder will be used the next time that you run Global Mapper.
- Added option to save the elevation legend in the main view to a BMP file by right-clicking on it and selecting the appropriate option.
- Added option to control whether or not unit labels (e.g. "m" or "ft") are displayed on the elevation legend. This setting can be changed by right-clicking on it and selecting the appropriate option.
- Fixed problem with grid line labels being cropped at the bottom when footer strings were used during printing.
- Made new Explorer-style dialogs be used for all file selection.
- Fixed crash when displaying metadata for map catalogs that contain elevation layers.
- Fixed errors loading some tiled TIFF files with separated color channels.
- Made dot symbols look better when printed.
- Made the filling in of small gaps work when exporting DEM files with arc degrees as the current view/export units on the Projection tab of the Configuration dialog. (Registered Version Only)
- When creating area features from selected line features with the Digitizer Tool, only prompt for name, attribute, and style information once, then use that information for all remaining areas created from the selected lines if no other information is available from the lines making up the area.
- Made the count of selected features appear in the status bar when the Digitizer Tool is active and you are not actively working with the selected features.
- Corrected decoding of New Zealand Map Grid projections from ECW files. They were being decoded as a closely-approximated Transverse Mercator projection.
- Fixed loading of some ASRP-format data files.
- Fixed errors loading DLG-O files with area features and non-contiguous element IDs for lines (these are very rare).
- When exporting DXF format files, made area features be fully cropped to the specified export bounds rather than just exporting in whole any area that intersects the export bounds. (Registered Version Only)
- Fixed ordering of data written to GPX files to make sure that really picky applications, like Garmin's MapSource, can always read them. (Registered Version Only)
- Fixed problem when doing multiple line connection operations from the Search by Attributes dialog that would result in extra long lines (they would loop over themselves) after the first line connection operation.
- Made "Longitude of Pole" attributes for Polar Stereographic projections be saved and read from PRJ files.
- Added support for a BOTTOM_UP parameter in BIL file headers to specify that the data starts at the lower-left rather than the top-left. Just add a line with the text "BOTTOM_UP Y" to the .hdr file to flip the data vertically.
- Added a LAYER_DESC parameter to the GENERATE_CONTOURS script command to allow the name of the generated contour layer to be changed from the default. (Registered Version Only)
- Fixed problem with point features getting the wrong attributes from some E00 files.
- Made holes in area features maintain the descriptions of their parents when exported to ASCII text files. (Registered Version Only)
- Allowed minus signs, dollar signs, and underscores to be used at the start of labels when exporting to DXF format files. Previously those characters were removed from the start of lines to prevent errors. Now a space is just inserted before those characters to get rid of the errors. (Registered Version Only)
- Added support for a LABEL_ON_LINE parameter in ASCII text files for specifying that labels for a line feature should be centered on the line. (Registered Version Only)

_http://www.globalmapper.com/global_mapper7_setup.exe,
User is offlineProfile Card PM
Go to the top of the page
+
Bish
8.05.2006 - 11:47
Сообщение #14



Visionary
Group Icon
Группа: Старейшины
Сообщений: 4982
Регистрация: 13.06.2004
Из: Россия

Пользователь №: 50472




Global Mapper v7.04
Что нового:
Added KML/KMZ export function. This allows any loaded vector data to be exported to a KML/KMZ format file for use in Google Earth. (Registered Version Only)
Fixed problem on some systems that would cause the application to disappear or crash when attempting to select a new file for loading or saving. This problem occurred on Windows XP SP2 systems which also had Adobe Acrobat Reader v7 installed. Apparently the installation of Acrobat Reader changed some built-in Windows behavior in a way that broke Global Mapper (and several other applications).
Allowed batch conversion of vector data to DGN format files. (Registered Version Only)
Allowed export of DGN format files from Global Mapper scripts using the EXPORT_VECTOR command. (Registered Version Only)
Made tag values be read in from DGN files and stored as attributes.
Made point features stored as 0-dimensional lines in DGN v7 files load correctly.
When exporting DGN files, made the current view background color be saved as the DGN background color. (Registered Version Only)
When exporting DGN files, made the correct unit conversion and type values be used rather than reporting all units as meters. (Registered Version Only)
When exporting DGN files, made the level number used for exported features that originally came from a DGN file be maintained.
When exporting DGN files, made text features be exported for line and area features that have labels. (Registered Version Only)
When exporting DGN files, made text labels be sized proportionally to the font size used for the label in Global Mapper. The export options dialog also has an option to scale the text to make it larger or smaller and still maintain the proportionality. (Registered Version Only)
When exporting DGN files, made generation of a 3D DGN file optional. (Registered Version Only)
When exporting DGN files, added an option to also generate a PRJ file containing the native projection of the coordinates in the DGN file. (Registered Version Only)
When exporting DGN files, added an option to specify the unit resolution to use, such as 100 to use centimeters when the export ground units are meters. (Registered Version Only)
Allowed saving of the 3D view to images of a size other than the 3D view window size on systems that support this operation. Many older or underpowered video cards will not support this operation, but newer video cards with the latest drivers should be ok. (Registered Version Only)
Added support for loading Japanese DEM (JDEM) .mem files.
Added support for loading SEGP1 seismic shotpoint format data files.
Added support for loading CompeGPS RTE, TRK, and WPT format files.
Added option when batch converting to a zoned projection, like UTM or Gauss Krueger, to "Automatically Select the Best Zone" for each file being converted, allowing easy conversion of files that span multiple zones. The auto-selection option will be at the top of the zone list for those zones where it is available. (Registered Version Only)
Added option when gridding data on export into adjacent tiles to make those tiles overlap by some percentage of the tile size. This is to allow more easily overlaying the data in other non-mapping applications, like Photoshop. (Registered Version Only)
Added option when gridding data on export and separately naming tile rows and columns to specify the start number or letter for the rows and/or columns rather than just using 1 and 'A'. (Registered Version Only)
Added option when gridding data on export into a specified number of rows and columns to crop the right and bottom grid cells to the specified export bounds. This may make the grid cells not all have the same size, but will prevent extraneous data from appearing on the right and bottom edges. (Registered Version Only)
Changed naming of numeric rows/columns when gridding data on export to make the numeric name for every tile be padded with 0's to the maximum length of the numeric label for any row/column. For example, if 100 columns of tiles were being exported, the columns names would go 001, 002, ..., 100 rather than 1, 2, ..., 100. (Registered Version Only)
Made most settings on the Gridding tab of exports be remembered between runs. (Registered Version Only)
Added option when gridding data on export to not export grid tiles where the destination file already exists. This is useful for continuing a canceled export, or re-exporting just some tiles that you want different data in. Simply delete the tiles that you want to re-export, then do the export again with the option to skip existing files checked. (Registered Version Only)
Added option when gridding data on export to specify a prefix to apply to the column and row names when separately naming rows and columns. (Registered Version Only)
When loading Shapefile, MapInfo, and DXF format files, use the layer name/attributes to try and auto-classify features.
When exporting Shapefile and MapInfo MIF/MID features and including the description as an attribute, also хочу сломать the classification as a GM_TYPE attribute if the description for any of the feature being exported is not the default of the classification name. (Registered Version Only)
Added built-in support for the Quebec MTM projection.
Added support for western hemisphere zones when using the Gauss Krueger 6-degree zone projection.
Added built-in support for the LUREF (Luxembourg) datum.
Improved accuracy of the Dutch Grid projection and the Dutch (RD) datum.
When performing cut-and-fill volume calculations, also calculate and display the surface area that needs cut and filled respectively. (Registered Version Only)
Made the "Path Details" dialog for a 3D path profile display the along-ground distance (i.e. distance with elevation changes taken into account) as well as the minimum and maximum elevation values along the path.
Added support for loading USRP data sets (ASRP data with UTM coordinates).
Made all appropriate border pixels be marked as transparent in ADRG, ASRP, and USRP data sets.
Added option to Simple ASCII Export to make style attribute export be controlled separately from data attribute export. (Registered Version Only)
Added button to the custom shader edit dialog allowing the elevation value for an existing elevation/color range be changed.
Added option to the Digitizer Tool when multiple point features are selected to identify any point features that are within a user-specified distance of other selected point features. This is helpful for finding duplicate points.
Display the height of any gridded elevation data in the status bar as you move the cursor around, even if the cursor is near vector data (the height will be appended to the nearest vector feature description).
When placing new point/text features or moving a single point/text feature with the Digitizer Tool, make the point snap to existing features just like line and area features do when drawing them. You can hold down Ctrl when placing the point to disable snapping.
Made CSV files created by the Lowrance SonarViewer software be automatically detected and loaded rather than prompting the user for input parameters.
Added option to CDF export to allow exporting coordinates in either the current projection system or lat/lon. (Registered Version Only)
Allowed DTED files with invalid column numbers in the data record to be loaded.
Added support for loading Geosoft Grid files with right-handed vector orientation.
Added automatic detection of world files that have an extra .txt appended to the filename.
Improved loading of ATTRIB values from DXF values.
Improved export of point/text features to DXF files. (Registered Version Only)
Added option to use the display label as the layer name when exporting to DXF files rather than the description/type if a layer name is available for a feature. (Registered Version Only)
Allowed "Crop to Selected Area Feature" option to be used when generating contours.
Added option when generating contours to control whether or not unit indicator suffixes should be appended to labels for the generated contour features.
Added INC_UNIT_SUFFIX parameter to the GENERATE_CONTOURS script command to allow specification of whether unit indicator suffixes should be appended to the labels for the generated contour features. (Registered Version Only)
Added Sphere Radius 6371204 m as an available ellipsoid for adding custom datums.
Fixed problem with custom datums created by the user being written out to new files, like GeoTIFFs, as the Adindan datum. (Registered Version Only)
Fixed incorrect loading of some MSI Planet format height files (they would appear garbled).
Fixed errors loading some GPX files with extremely long text strings in them.
Fixed problem with missing lat/lon grid lines in some projections where the lat/lon grid is not valid over the entire data bounding box.
Fixed automatic removal of collars for files with very curved lat/lon boundaries, such as the Antarctica DRGs.
Fixed loading of attributes from MIF/MID files when one of the attribute names starts with "Index".
Fixed errors trying to batch convert raster data with both the "Use Other Source Files As Filler" and "Auto Adjust Contrast" options enabled. (Registered Version Only)
Improved rectification based on an OziExplorer .map file when that .map file has a UTM grid and each control point has both lat/long and grid coordinates or the .map file has control points that are marked as excluded.
Allowed ground control points specified for rectification with the IMPORT script command to be specified in a projection other than the specified projection for the file being rectified. The use of either the GCP_PROJ_NAME or GCP_PROJ_FILENAME parameters will cause the control points to be projected automatically to the file projection before rectification occurs. (Registered Version Only)
When loading LIDAR LAS data, save the class of each sample point as an attribute.
When batch converting from LIDAR LAS data to other vector formats, add an option to only хочу сломать sample points classified as "ground shot points" in the output. (Registered Version Only)
Don't display POLYLINE entities from DXF files that are marked as 3D polygon meshes or polyface meshes.
When loading generic ASCII files with quoted fields, make sure the quoted fields are properly treated as a single field and that the quotes are removed for all fields. Also treat back-to-back double quotes as a single quote mark in the text that doesn't act as a field delimeter.
When loading generic ASCII text files and using column names from the first line of the file as attribute names, don't хочу сломать attributes from non-coordinates lines.
Fixed problem introduced in v7.02 release with saving Transverse Mercator projections to ECW files (the projection name was not being saved for some users). (Registered Version Only)
Allowed view shed calculations to have a radius as small as one thousandth or a mile or kilometer rather than the previous minimum of one tenth of a mile or kilometer. (Registered Version Only)
Fixed some printing issues and improved printing performance when printing to large paper sizes.
Added a registry key to allow specifying that positioning information from TIFF world files, if available, should be preferred over the positioning data stored within TIFF file headers. If you create a HKEY_CURRENT_USER\Software\GlobalMapper\TIFFPreferTFW DWORD value with the value set to 1, then the world file positions will be preferred.
Added support for reading and writing oblique stereographic projections from/to GeoTIFF files.
Added support for reading and writing Gauss Krueger (6-degree zones) projections using the Pulkovo 1942 datum from/to GeoTIFF files.
Added support for reading and writing the Potsdam/DHDN datum from/to GeoTIFF files as well as Gauss Krueger Germany (3 degree zones) projections with that datum.
Added checkbox to the ASCII import file to allow using the same configuration for all files during that load or batch convert operation.
Allowed positioning data from Ozi .map and CompeGPS .imp files to be used to position ECW files that do not contain embedded positioning information.
Corrected positioning of some non-WGS84 MapTech maps. In some cases the wrong datum would be used. Now if there is any doubt the user is prompted to select the correct projection.
Made user-defined projections be automatically decoded from MrSID files.
Fixed export of NAD83 datums to Erdas Imagine format files. (Registered Version Only)
Made French Lambert projections be decoded and encoded from/to ECW files automatically.
Improved positioning of NOS/GEO format charts by positioning them using the specified native chart projection if recognized.
When using the GENERATING_CONTOURS script command, allowed negative intervals to be specified if the SINGLE_LEVEL_ONLY=YES parameter is specified. (Registered Version Only)
Fixed half pixel shift and other positioning problems when exporting to new Float/Grid format files. (Registered Version Only)
Fixed errors loading text from some single-precision E00 files.
Dramatically sped up the calculation of auto-contrast statistics for large MrSID files.
When loading MapInfo MIF/MID format files, don't set any numeric fields to have a value of 0 when their value is actually empty.
Fixed bug from v7.03 release that could cause discontinuities in rectified imagery that used the triangulated rectification method.
When displaying feature information for polygon features that have islands/holes, хочу сломать the area of the island features as a separate item in the Geometry section of the Feature Info dialog. Also subtract the area of those islands away from the total polygon area to give a true representation of the actual area covered by the polygon.
Improved compression of 24-bit RGB GeoTIFF files created by Global Mapper that are created with the LZW compression option. (Registered Version Only)
Improved consistency of multiple view sheds calculated from the same center point with the same sample spacing but different radii when the specify sample spacing is much larger than the spacing of the elevation files that are used. (Registered Version Only)
Sped up calculation of view sheds when the elevation data being used comes from a map catalog or Global Mapper Grid files. (Registered Version Only)
Sped up contour generation when the elevation data being used comes from a map catalog or Global Mapper Grid files.
Added support for specifying a scale factor for Lambert Conformal Conic and Stereographic projections.
Significantly sped up export to any raster format using a palette, such as palette-based GeoTIFF or PNG exports. (Registered Version Only)
Added option to do case-sensitive searches with the Search->Search by Attributes menu command.
Made map catalogs be exportable to Global Mapper Package files. (Registered Version Only)
Fixed orientation of GPS heading arrow when the display projection is one in which north is not necessarily straight up.
Reduced memory usage for E00 files with lots of attribute values.
Fixed calculation of PERIMETER and ENCLOSED_AREA values for some range rings that had incorrect values stored.
Fixed decoding of UTM zone 60 projections from NASA LandSat .met files.
When rectifying data with vector data displayed in the Reference pane, made clicking near a vector feature automatically "snap" to that feature to assure exact matches.
Made statistics (STX) files be generated for elevation BIL file exports. (Registered Version Only)
Added SHOW_3D_VIEW command to the scripting language to allow scripts and workspaces to bring up the 3D view window. (Registered Version Only)
Added option to generate XYZ grid files in row-major order. (Registered Version Only)
Added option to anti-alias pixels (interpolate) when batch converting between raster formats. (Registered Version Only)
Fixed rare problems loading some portions of Arc Binary Grid format files (technically, some 32-bit RLE encoded tiles with very large values were incorrectly decoded).
Fixed problem with labeled areas exported to Landmark Graphics ASCII format files have two TEXT labels exported. (Registered Version Only)
Made image-optimized palettes always contain white and/or black if those colors are in the image being exported. This makes collars stay the color they are supposed to be. (Registered Version Only)
Made tracking of Garmin USB GPS devices work for newer devices, like the SP2720, that send some extra information when first connected.
Added warning to exports when a large amount of TerraServer data would be exported to explain that it could be very slow and give the user a chance to cancel the operation. (Registered Version Only)

_http://www.globalmapper.com/global_mapper7_setup.exe,


Сообщение было отредактировано Leon71: 19.10.2007 - 11:02
User is offlineProfile Card PM
Go to the top of the page
+
Leon71
19.10.2007 - 10:52
Сообщение #15



Honorable Member
Group Icon
Группа: Администраторы
Сообщений: 9009
Регистрация: 16.12.2004

Пользователь №: 78139




Global Mapper 9
Size: 21,2 Mb
Download: _http://www.globalmapper.com/global_mapper9_setup.exe
User is offlineProfile Card PM
Go to the top of the page
+
Leon71
20.01.2009 - 18:04
Сообщение #16



Honorable Member
Group Icon
Группа: Администраторы
Сообщений: 9009
Регистрация: 16.12.2004

Пользователь №: 78139




Global Mapper 10
Size: 27,5 Mb
Download: _http://www.globalmapper.com/global_mapper10_setup.exe
User is offlineProfile Card PM
Go to the top of the page
+
layman
17.09.2009 - 09:39
Сообщение #17



сисадмин
Group Icon
Группа: Модераторы
Сообщений: 1583
Регистрация: 19.04.2006
Из: Самары

Пользователь №: 159636




Global Mapper 11.0
Size:
41.1 Mb
_http://www.globalmapper.com/global_mapper11_setup.exe


--------------------
IPB Image
User is offlineProfile Card PM
Go to the top of the page
+
Реклама

Reply to this topicStart new topic
1 чел. читают эту тему (гостей: 1, скрытых пользователей: 0)
Пользователей: 0 -

 



- Текстовая версия Сейчас: 29.03.2024 - 02:09
]]> ]]>
]]> Яндекс.Метрика ]]>