IPB

Здравствуйте, гость ( Вход | Регистрация )

 Forum Rules ПРАВИЛА ФОРУМА. ЧИТАТЬ ВСЕМ !
> Mikrotik RouterOS 6.40.2, ОС на базе Linux для маршрутизаторов Mikrotik
logic
28.07.2017 - 18:01
Сообщение #1



Full Member
***
Группа: Full member
Сообщений: 51
Регистрация: 21.04.2015

Пользователь №: 282045




Mikrotik RouterOS

Одним из продуктов MikroTik является RouterOS — сетевая операционная система на базе Linux. RouterOS предназначена для установки на маршрутизаторы Mikrotik RouterBoard. Также данная система может быть установлена на ПК, превращая его в маршрутизатор с функциями брандмауэра, VPN-сервера/клиента, QoS, точки доступа и другими. Система также может служить в качестве Captive-портала на основе системы беспроводного доступа.

Операционная система имеет несколько уровней лицензий с возрастающим числом функций. Кроме того, существует программное обеспечение под названием Winbox, которое предоставляет графический интерфейс для настройки RouterOS. Доступ к устройствам под управлением RouterOS возможен также через FTP, Telnet, и SSH. Существует также API, позволяющий создавать специализированные приложения для управления и мониторинга.


https://ru.wikipedia.org/wiki/MikroTik
https://mikrotik.com/download
User is offlineProfile Card PM
Go to the top of the page
+
 
Reply to this topicStart new topic
Ответов(1 - 4)
logic
28.07.2017 - 18:06
Сообщение #2



Full Member
***
Группа: Full member
Сообщений: 51
Регистрация: 21.04.2015

Пользователь №: 282045




Mikrotik RouterOS 6.40
Цитата
What's new in v6.40 (2017-Jul-21 08:45):
!) lte - added initial fastpath support (except SXT LTE and Sierra modems);
!) lte - added initial support for passthrough mode for lte modems that supports fastpath;
!) wireless - added Nv2 AP synchronization feature "nv2-modes" and "nv2-sync-secret" option;
*) bonding - fixed 802.3ad mode on RB1100AHx4;
*) btest - fixed crash when packet size has been changed during test;
*) capsman - added "current-registered-clients" and "current-authorized-clients" count for CAP interfaces;
*) capsman - fixed EAP identity reporting in "registration-table";
*) capsman - set minimal "caps-man-names" and "caps-man-certificate-common-names" length to 1 char;
*) certificate - added "crl-use" setting to disable CRL use (CLI only);
*) certificate - update and reload old certificate with new one if SKID matches;
*) chr - fixed MAC address assignment when hot plugging NIC on XenServer;
*) chr - maximal system disk size now limited to 16GB;
*) conntrack - fixed IPv6 connection tracking enable/disable;
*) console - fixed different command auto complete on <tab>;
*) crs212 - fixed Optech sfp-10G-tx module compatibility with SFP ports;
*) defconf - added IPv6 default firewall configuration (IPv6 package must be enabled on reset);
*) defconf - improved IPv4 default firewall configuration;
*) defconf - renamed 192.168.88.1 address static DNS entry from "router" to "router.lan";
*) dhcp - added "debug" logs on MAC address change;
*) dhcpv4-client - added "gateway-address" script parameter;
*) dhcpv4-server - fixed lease renew for DHCP clients that sends renewal with "ciaddr = 0.0.0.0";
*) dhcpv4-server - fixed server state on interface change in Winbox and Webfig;
*) discovery - fixed timeouts for LLDP neighbours;
*) dns - remove all dynamic cache RRs of same type when adding static entry;
*) dude - fixed server crash;
*) email - added support for multiple attachments;
*) ethernet - fixed occasional broken interface order after reset/first boot;
*) ethernet - fixed rare linking problem with forced 10Mbps full-duplex mode;
*) export - added "terse" option;
*) export - added default "init-delay" setting for "/routerboard settings" menu;
*) export - added router model and serial number to configuration export;
*) export - fixed "/interface list" verbose export;
*) export - fixed "/ipv6 route" compact export;
*) export - fixed MPLS "dynamic-label-range" export;
*) export - fixed SNMP "src-address" for compact export;
*) fastpath - improved performance when packets for slowpath are received;
*) fastpath - improved process of removing dynamic interfaces;
*) fasttrack - fixed fasttrack over interfaces with dynamic MAC address;
*) fetch - added "src-address" parameter for HTTP and HTTPS;
*) filesystem - improved error correcting process on tilera and RB1100AHx4 storage;
*) firewall - added "none-dynamic" and "none-static" options for "address-list-timeout" parameter;
*) firewall - fixed bridge "action=log" rules;
*) firewall - fixed cosmetic "inactive" flag when item was disabled;
*) firewall - fixed crash on fasttrack dummy rule manual change attempt;
*) firewall - removed unique address list name limit;
*) hAP ac lite - removed nonexistent "wlan-led";
*) hotspot - added "address-list" support in "walled-garden" IP section;
*) hotspot - require "dns-name" to contain "." symbol under Hotspot Server Profile configuration;
*) ike1 - added log error message if netmask was not provided by "mode-config" server;
*) ike1 - added support for "framed-pool" RADIUS attribute;
*) ike1 - create tunnel policy when no split net provided;
*) ike1 - fixed minor memory leak on peer configuration change;
*) ike1 - kill phase1 instead of rekey if "mode-config" is used;
*) ike1 - removed SAs on DPD;
*) ike1 - send phase1 delete;
*) ike1 - wait for cfg set reply before ph2 creation with xAuth;
*) ike2 - added RADIUS attributes "Framed-Pool", "Framed-Ip-Address", "Framed-Ip-Netmask";
*) ike2 - added pfkey kernel return checks;
*) ike2 - added support for "Mikrotik_Address_List" RADIUS attribute;
*) ike2 - added support for "mode-config" static address;
*) ike2 - by default use "/24" netmask for peer IP address in split net;
*) ike2 - fixed duplicate policy checking with "0.0.0.0/0" policies;
*) ike2 - prefer traffic selector with "mode-config" address;
*) ipsec - added "firewall=add-notrack" peer option (CLI only);
*) ipsec - added information in console XML for "mode-config" menu;
*) ipsec - added support for "key-id" peer identification type;
*) ipsec - allow to specify chain in "firewall" peer option;
*) ipsec - do not deduct "dst-address" from "sa-dst-address" for "/0" policies;
*) ipsec - enabled modp2048 DH group by default;
*) ipsec - fixed connections cleanup on policy or proposal modification;
*) ipsec - optimized logging under IPSec topic;
*) ipsec - removed policy priority;


For a full changelog please visit https://mikrotik.com/download/changelogs/current-release-tree
Download: 21,6 Mb
Extra packages https://download2.mikrotik.com/routeros/6.40/all_packages-x86-6.40.zip
https://mikrotik.com/download
User is offlineProfile Card PM
Go to the top of the page
+
logic
10.08.2017 - 19:52
Сообщение #3



Full Member
***
Группа: Full member
Сообщений: 51
Регистрация: 21.04.2015

Пользователь №: 282045




Mikrotik RouterOS 6.40.1
Цитата
What's new in 6.40.1 (2017-Aug-03 12:37):

*) bonding - improved reliability on bonding interface removal;
*) chr - fixed false warnings on upgrade reboots;
*) dhcpv6-client - do not run DHCPv6 client when IPv6 package is disabled;
*) export - fixed export for different parameters where numerical range or constant string is expected;
*) firewall - properly remove "address-list" entry after timeout ends;
*) interface - improved interface state change handling when multiple interfaces are affected at the same time;
*) lte - fixed LTE not passing any traffic while in running state;
*) ovpn-client - fixed incorrect netmask usage for pushed routes (introduced in 6.40);
*) pppoe-client - fixed incorrectly formed PADT packet;
*) rb2011 - fixed possible LCD blinking along with ethernet LED (introduced in 6.40);
*) rb922 - restored missing wireless interface on some boards;
*) torch - fixed Torch on PPP tunnels (introduced in 6.40);
*) trafficgen - fixed "lost-ratio" showing incorrect statistics after multiple sequences;
*) winbox - added "none-dynamic" and "none-static" options for "address-list-timeout" parameter under NAT, Mangle and RAW rules;
Download: 21,6 Mb
Extra packages https://download2.mikrotik.com/routeros/6.40.1/all_packages-x86-6.40.1.zip
https://mikrotik.com/download
User is offlineProfile Card PM
Go to the top of the page
+
logic
29.08.2017 - 22:17
Сообщение #4



Full Member
***
Группа: Full member
Сообщений: 51
Регистрация: 21.04.2015

Пользователь №: 282045




Mikrotik RouterOS 6.40.2
What's new in 6.40.2 (2017-Aug-08 13:13):

*) dhcpv6-client - fixed IA evaluation order;
*) led - fixed "modem-signal" LEDs (introduced in 6.40);
*) pppoe-client - fixed wrong MRU detection over VLAN interfaces;
*) rb2011 - fixed possible LCD blinking along with ethernet LED (introduced in 6.40);
*) sfp - fixed invalid temperature readings when ambient temperature is below 0C;
*) winbox - added certificate settings;
*) winbox - added support for certificate CRL list;
*) winbox - do not show LCD menu for devices which does not have it;
*) winbox - hide "level" and "tunnel" parameters for IPSec policy templates;
*) winbox - hide FAN speed if it is 0RPM;

Download: 21,62 Mb
Extra packages https://download2.mikrotik.com/routeros/6.40.2/all_packages-x86-6.40.2.zip
https://mikrotik.com/download
User is offlineProfile Card PM
Go to the top of the page
+
Leon71
6.09.2017 - 17:21
Сообщение #5



Honorable Member
Group Icon
Группа: Администраторы
Сообщений: 8826
Регистрация: 16.12.2004

Пользователь №: 78139




Mikrotik RouterOS 6.40.3
What's new in 6.40.3 (2017-Sep-01 07:40):

*) dhcpv6-server - do not release address of static binding from pool after server removal;
*) export - fixed "/system routerboard" export (introduced in 6.40.1);
*) export - fixed export for PoE-OUT related settings;
*) ike1 - fixed initiator ID comparison to NAT-OA;
*) led - fixed "on" and "off" triggers when multiple LEDs are selected;
*) led - fixed RB711UA ether1 LED (introduced in v6.38rc16);
*) lte - do not show USB LTE modem under "/port" menu;
*) lte - fixed ethernet flap when LTE establishes connection;
*) lte - fixed SXT LTE graphs in QuickSet;
*) lte - improved reliability of USB LTE modems;
*) poe-out - fixed router reboot after "poe-out-status" changes;
*) rb1100ahx4 - fixed HW acceleration fragmented packet decryption when fragment is smaller than 64 bytes;
*) rb750gr3 - show warning and do not allow to use "protected-bootloader" feature if "factory-firmware" older than 3.34.4 version;
*) routerboard - added "mode-button" support for RB750Gr3 (CLI only);
*) ssh - do not execute command if it starts with "-" symbol;
*) traffic-flow - fixed reboots when IPv6 address has been set as target address without active IPv6 package;
*) userman - fixed "limitation" and "profile-limitation" update;
*) userman - fixed CoA packet processing after changes in "/tool user-manager router" configuration;
*) webfig - allow to open table entry even if table is not sorted by # (introduced in v6.40);
*) webfig - allow to unset "rate-limit" for DHCP leases;
*) winbox - added possibility to define "comment" for "/routing bgp network" entries;
*) winbox - do not show FAN related information under "/system health" menu for devices which does not have it;
*) winbox - do not show LCD menu for devices which does not have it;
*) winbox - fixed ARP table update after entry changes state to incomplete;
*) wireless - added "russia3" country settings;
*) wireless - added New Zealand regulatory domain information for P2P links;
*) wireless - updated China and New Zealand regulatory domain information;
*) www - fixed unresponsive Web services (introduced in v6.40);

Download: 21,61 Mb
Extra packages https://download2.mikrotik.com/routeros/6.40.3/all_packages-x86-6.40.3.zip
https://mikrotik.com/download
User is offlineProfile Card PM
Go to the top of the page
+
Реклама

Reply to this topicStart new topic
1 чел. читают эту тему (гостей: 1, скрытых пользователей: 0)
Пользователей: 0 -

 



- Текстовая версия Сейчас: 21.09.2017 - 01:12
]]> ]]>
]]> Яндекс.Метрика Google+ ]]>
Загружается, подождите...