IPB

Здравствуйте, гость ( Вход | Регистрация )

 Forum Rules ПРАВИЛА ФОРУМА. ЧИТАТЬ ВСЕМ !
> Mikrotik RouterOS 6.41.1, ОС на базе Linux для маршрутизаторов Mikrotik
logic
28.07.2017 - 18:01
Сообщение #1



Full Member
***
Группа: Full member
Сообщений: 186
Регистрация: 21.04.2015

Пользователь №: 282045




Mikrotik RouterOS

Одним из продуктов MikroTik является RouterOS — сетевая операционная система на базе Linux. RouterOS предназначена для установки на маршрутизаторы Mikrotik RouterBoard. Также данная система может быть установлена на ПК, превращая его в маршрутизатор с функциями брандмауэра, VPN-сервера/клиента, QoS, точки доступа и другими. Система также может служить в качестве Captive-портала на основе системы беспроводного доступа.

Операционная система имеет несколько уровней лицензий с возрастающим числом функций. Кроме того, существует программное обеспечение под названием Winbox, которое предоставляет графический интерфейс для настройки RouterOS. Доступ к устройствам под управлением RouterOS возможен также через FTP, Telnet, и SSH. Существует также API, позволяющий создавать специализированные приложения для управления и мониторинга.


https://ru.wikipedia.org/wiki/MikroTik
https://mikrotik.com/download
User is offlineProfile Card PM
Go to the top of the page
+
 
Reply to this topicStart new topic
Ответов(1 - 8)
logic
28.07.2017 - 18:06
Сообщение #2



Full Member
***
Группа: Full member
Сообщений: 186
Регистрация: 21.04.2015

Пользователь №: 282045




Mikrotik RouterOS 6.40
Цитата
What's new in v6.40 (2017-Jul-21 08:45):
!) lte - added initial fastpath support (except SXT LTE and Sierra modems);
!) lte - added initial support for passthrough mode for lte modems that supports fastpath;
!) wireless - added Nv2 AP synchronization feature "nv2-modes" and "nv2-sync-secret" option;
*) bonding - fixed 802.3ad mode on RB1100AHx4;
*) btest - fixed crash when packet size has been changed during test;
*) capsman - added "current-registered-clients" and "current-authorized-clients" count for CAP interfaces;
*) capsman - fixed EAP identity reporting in "registration-table";
*) capsman - set minimal "caps-man-names" and "caps-man-certificate-common-names" length to 1 char;
*) certificate - added "crl-use" setting to disable CRL use (CLI only);
*) certificate - update and reload old certificate with new one if SKID matches;
*) chr - fixed MAC address assignment when hot plugging NIC on XenServer;
*) chr - maximal system disk size now limited to 16GB;
*) conntrack - fixed IPv6 connection tracking enable/disable;
*) console - fixed different command auto complete on <tab>;
*) crs212 - fixed Optech sfp-10G-tx module compatibility with SFP ports;
*) defconf - added IPv6 default firewall configuration (IPv6 package must be enabled on reset);
*) defconf - improved IPv4 default firewall configuration;
*) defconf - renamed 192.168.88.1 address static DNS entry from "router" to "router.lan";
*) dhcp - added "debug" logs on MAC address change;
*) dhcpv4-client - added "gateway-address" script parameter;
*) dhcpv4-server - fixed lease renew for DHCP clients that sends renewal with "ciaddr = 0.0.0.0";
*) dhcpv4-server - fixed server state on interface change in Winbox and Webfig;
*) discovery - fixed timeouts for LLDP neighbours;
*) dns - remove all dynamic cache RRs of same type when adding static entry;
*) dude - fixed server crash;
*) email - added support for multiple attachments;
*) ethernet - fixed occasional broken interface order after reset/first boot;
*) ethernet - fixed rare linking problem with forced 10Mbps full-duplex mode;
*) export - added "terse" option;
*) export - added default "init-delay" setting for "/routerboard settings" menu;
*) export - added router model and serial number to configuration export;
*) export - fixed "/interface list" verbose export;
*) export - fixed "/ipv6 route" compact export;
*) export - fixed MPLS "dynamic-label-range" export;
*) export - fixed SNMP "src-address" for compact export;
*) fastpath - improved performance when packets for slowpath are received;
*) fastpath - improved process of removing dynamic interfaces;
*) fasttrack - fixed fasttrack over interfaces with dynamic MAC address;
*) fetch - added "src-address" parameter for HTTP and HTTPS;
*) filesystem - improved error correcting process on tilera and RB1100AHx4 storage;
*) firewall - added "none-dynamic" and "none-static" options for "address-list-timeout" parameter;
*) firewall - fixed bridge "action=log" rules;
*) firewall - fixed cosmetic "inactive" flag when item was disabled;
*) firewall - fixed crash on fasttrack dummy rule manual change attempt;
*) firewall - removed unique address list name limit;
*) hAP ac lite - removed nonexistent "wlan-led";
*) hotspot - added "address-list" support in "walled-garden" IP section;
*) hotspot - require "dns-name" to contain "." symbol under Hotspot Server Profile configuration;
*) ike1 - added log error message if netmask was not provided by "mode-config" server;
*) ike1 - added support for "framed-pool" RADIUS attribute;
*) ike1 - create tunnel policy when no split net provided;
*) ike1 - fixed minor memory leak on peer configuration change;
*) ike1 - kill phase1 instead of rekey if "mode-config" is used;
*) ike1 - removed SAs on DPD;
*) ike1 - send phase1 delete;
*) ike1 - wait for cfg set reply before ph2 creation with xAuth;
*) ike2 - added RADIUS attributes "Framed-Pool", "Framed-Ip-Address", "Framed-Ip-Netmask";
*) ike2 - added pfkey kernel return checks;
*) ike2 - added support for "Mikrotik_Address_List" RADIUS attribute;
*) ike2 - added support for "mode-config" static address;
*) ike2 - by default use "/24" netmask for peer IP address in split net;
*) ike2 - fixed duplicate policy checking with "0.0.0.0/0" policies;
*) ike2 - prefer traffic selector with "mode-config" address;
*) ipsec - added "firewall=add-notrack" peer option (CLI only);
*) ipsec - added information in console XML for "mode-config" menu;
*) ipsec - added support for "key-id" peer identification type;
*) ipsec - allow to specify chain in "firewall" peer option;
*) ipsec - do not deduct "dst-address" from "sa-dst-address" for "/0" policies;
*) ipsec - enabled modp2048 DH group by default;
*) ipsec - fixed connections cleanup on policy or proposal modification;
*) ipsec - optimized logging under IPSec topic;
*) ipsec - removed policy priority;


For a full changelog please visit https://mikrotik.com/download/changelogs/current-release-tree
Download: 21,6 Mb
Extra packages https://download2.mikrotik.com/routeros/6.40/all_packages-x86-6.40.zip
https://mikrotik.com/download
User is offlineProfile Card PM
Go to the top of the page
+
logic
10.08.2017 - 19:52
Сообщение #3



Full Member
***
Группа: Full member
Сообщений: 186
Регистрация: 21.04.2015

Пользователь №: 282045




Mikrotik RouterOS 6.40.1
Цитата
What's new in 6.40.1 (2017-Aug-03 12:37):

*) bonding - improved reliability on bonding interface removal;
*) chr - fixed false warnings on upgrade reboots;
*) dhcpv6-client - do not run DHCPv6 client when IPv6 package is disabled;
*) export - fixed export for different parameters where numerical range or constant string is expected;
*) firewall - properly remove "address-list" entry after timeout ends;
*) interface - improved interface state change handling when multiple interfaces are affected at the same time;
*) lte - fixed LTE not passing any traffic while in running state;
*) ovpn-client - fixed incorrect netmask usage for pushed routes (introduced in 6.40);
*) pppoe-client - fixed incorrectly formed PADT packet;
*) rb2011 - fixed possible LCD blinking along with ethernet LED (introduced in 6.40);
*) rb922 - restored missing wireless interface on some boards;
*) torch - fixed Torch on PPP tunnels (introduced in 6.40);
*) trafficgen - fixed "lost-ratio" showing incorrect statistics after multiple sequences;
*) winbox - added "none-dynamic" and "none-static" options for "address-list-timeout" parameter under NAT, Mangle and RAW rules;
Download: 21,6 Mb
Extra packages https://download2.mikrotik.com/routeros/6.40.1/all_packages-x86-6.40.1.zip
https://mikrotik.com/download
User is offlineProfile Card PM
Go to the top of the page
+
logic
29.08.2017 - 22:17
Сообщение #4



Full Member
***
Группа: Full member
Сообщений: 186
Регистрация: 21.04.2015

Пользователь №: 282045




Mikrotik RouterOS 6.40.2
What's new in 6.40.2 (2017-Aug-08 13:13):

*) dhcpv6-client - fixed IA evaluation order;
*) led - fixed "modem-signal" LEDs (introduced in 6.40);
*) pppoe-client - fixed wrong MRU detection over VLAN interfaces;
*) rb2011 - fixed possible LCD blinking along with ethernet LED (introduced in 6.40);
*) sfp - fixed invalid temperature readings when ambient temperature is below 0C;
*) winbox - added certificate settings;
*) winbox - added support for certificate CRL list;
*) winbox - do not show LCD menu for devices which does not have it;
*) winbox - hide "level" and "tunnel" parameters for IPSec policy templates;
*) winbox - hide FAN speed if it is 0RPM;

Download: 21,62 Mb
Extra packages https://download2.mikrotik.com/routeros/6.40.2/all_packages-x86-6.40.2.zip
https://mikrotik.com/download
User is offlineProfile Card PM
Go to the top of the page
+
Leon71
6.09.2017 - 17:21
Сообщение #5



Honorable Member
Group Icon
Группа: Администраторы
Сообщений: 8855
Регистрация: 16.12.2004

Пользователь №: 78139




Mikrotik RouterOS 6.40.3
What's new in 6.40.3 (2017-Sep-01 07:40):

*) dhcpv6-server - do not release address of static binding from pool after server removal;
*) export - fixed "/system routerboard" export (introduced in 6.40.1);
*) export - fixed export for PoE-OUT related settings;
*) ike1 - fixed initiator ID comparison to NAT-OA;
*) led - fixed "on" and "off" triggers when multiple LEDs are selected;
*) led - fixed RB711UA ether1 LED (introduced in v6.38rc16);
*) lte - do not show USB LTE modem under "/port" menu;
*) lte - fixed ethernet flap when LTE establishes connection;
*) lte - fixed SXT LTE graphs in QuickSet;
*) lte - improved reliability of USB LTE modems;
*) poe-out - fixed router reboot after "poe-out-status" changes;
*) rb1100ahx4 - fixed HW acceleration fragmented packet decryption when fragment is smaller than 64 bytes;
*) rb750gr3 - show warning and do not allow to use "protected-bootloader" feature if "factory-firmware" older than 3.34.4 version;
*) routerboard - added "mode-button" support for RB750Gr3 (CLI only);
*) ssh - do not execute command if it starts with "-" symbol;
*) traffic-flow - fixed reboots when IPv6 address has been set as target address without active IPv6 package;
*) userman - fixed "limitation" and "profile-limitation" update;
*) userman - fixed CoA packet processing after changes in "/tool user-manager router" configuration;
*) webfig - allow to open table entry even if table is not sorted by # (introduced in v6.40);
*) webfig - allow to unset "rate-limit" for DHCP leases;
*) winbox - added possibility to define "comment" for "/routing bgp network" entries;
*) winbox - do not show FAN related information under "/system health" menu for devices which does not have it;
*) winbox - do not show LCD menu for devices which does not have it;
*) winbox - fixed ARP table update after entry changes state to incomplete;
*) wireless - added "russia3" country settings;
*) wireless - added New Zealand regulatory domain information for P2P links;
*) wireless - updated China and New Zealand regulatory domain information;
*) www - fixed unresponsive Web services (introduced in v6.40);

Download: 21,61 Mb
Extra packages https://download2.mikrotik.com/routeros/6.40.3/all_packages-x86-6.40.3.zip
https://mikrotik.com/download
User is offlineProfile Card PM
Go to the top of the page
+
Leon71
5.10.2017 - 22:21
Сообщение #6



Honorable Member
Group Icon
Группа: Администраторы
Сообщений: 8855
Регистрация: 16.12.2004

Пользователь №: 78139




Mikrotik RouterOS 6.40.4
What's new in 6.40.4 (2017-Oct-02 08:38):

*) address - show warning on IPv6 address when acquire from pool has failed;
*) arp - fixed invalid static ARP entries after reboot on interfaces without IP address;
*) crs1xx/2xx - fixed 1 Gbps forced mode for several SFP modules;
*) crs317 - added L2MTU support;
*) crs3xx - improved packet processing in slowpath;
*) defconf - fixed RouterOS default configuration (introduced in v6.40.3);
*) dhcp - fixed downgrade from RouterOS v6.41 or higher;
*) dhcpv6 client - added IAID check in reply;
*) dhcpv6-client - fixed IA check on solicit when "rapid-commit" is enabled;
*) dhcpv6-client - ignore unknown IA;
*) dhcpv6-client - require pool name to be unique;
*) e-mail - auto complete file name on "file" parameter (introduced in v6.40);
*) export - fixed wireless "ssid" and "supplicant-identity" compact export;
*) hotspot - fixed missing "/ip hotspot server profile" if invalid "dns-name" was specified;
*) hotspot - improved user statistics collection process;
*) ike1 - remove PH1 and PH2 when "mode-config" exchange fails;
*) ipsec - kill PH1 on "mode-config" address failure;
*) ipv6 - fixed IPv6 address request from pool;
*) lte - fixed modem initialization after reboot;
*) ntp-client - properly start NTP client after reboot if manual server IP is not configured;
*) rb931-2nd - fixed startup problems (requires additional reboot after upgrade);
*) routerboard - fixed "/system routerboard upgrade" for CRS212-8G-4S;
*) sfp - fixed OPTON module DDM information readings;
*) sfp - fixed temperature readings for various SFP modules;
*) snmp - fixed "/caps-man registration-table" uptime values;
*) snmp - fixed "/system license" parameters for CHR;
*) tile - improved reliability on MPLS package processing;
*) userman - fixed unresponsive RADIUS server (introduced in v6.40.3);
*) vlan - do not allow VLAN MTU to be higher than L2MTU;
*) webfig - improved reliability of login process;
*) wireless - added "etsi1" regulatory domain information;
*) wireless - improved WPA2 key exchange reliability;
*) wireless - updated "norway" regulatory domain information;

Download: 21,61 Mb
Extra packages https://download2.mikrotik.com/routeros/6.40.4/all_packages-x86-6.40.4.zip
https://mikrotik.com/download
User is offlineProfile Card PM
Go to the top of the page
+
Leon71
8.11.2017 - 18:01
Сообщение #7



Honorable Member
Group Icon
Группа: Администраторы
Сообщений: 8855
Регистрация: 16.12.2004

Пользователь №: 78139




Mikrotik RouterOS 6.40.5
What's new in 6.40.5 (2017-Oct-31 13:05):

*) certificate - fixed import of certificates with empty SKID;
*) crs3xx - fixed 100% CPU usage after interface related changes;
*) firewall - do not NAT address to 0.0.0.0 after reboot if to-address is used but not specified;
*) ike1 - fixed crash after downgrade if DH groups 19,20,21 were used for phase1;
*) ike1 - fixed RSA authentication for Windows clients behind NAT;
*) ipsec - fixed lost value for "remote-certificate" parameter after disable/enable;
*) ipv6 - fixed IPv6 addresses constructed from prefix and static address entry;
*) log - properly recognize MikroTik specific RADIUS attributes;
*) lte - do not reset modem when it is not possible to access SMS storage;
*) lte - fixed modem initialization after reboot;
*) lte - fixed PIN option after setting up the band;
*) sms - include time stamps in SMS delivery reports;
*) sms - properly initialize SMS storage;
*) snmp - fixed "/system license" parameters for CHR;
*) winbox - allow shorten bytes to k,M,G in Hotspot user limits;
*) wireless - fixed rate selection process when "rate-set=configured" and NV2 protocol is used;

Download: 21,62 Mb
Extra packages https://download2.mikrotik.com/routeros/6.40.5/all_packages-x86-6.40.5.zip
https://mikrotik.com/download
User is offlineProfile Card PM
Go to the top of the page
+
Leon71
24.12.2017 - 15:27
Сообщение #8



Honorable Member
Group Icon
Группа: Администраторы
Сообщений: 8855
Регистрация: 16.12.2004

Пользователь №: 78139




Mikrotik RouterOS 6.41
Цитата
hat's new in 6.41 (2017-Dec-22 11:55):

Important note!!! Backup before upgrade!
RouterOS (v6.40rc36-rc40 and) v6.41rc1+ contains new bridge implementation that supports hardware offloading (hw-offload).
This update will convert all interface "master-port" configuration into new bridge configuration, and eliminate "master-port" option as such.
Bridge will handle all Layer2 forwarding and the use of switch-chip (hw-offload) will be automatically turned on based on appropriate conditions.
The rest of RouterOS Switch specific configuration remains untouched in usual menus for now.
Please, note that downgrading to previous RouterOS versions will not restore "master-port" configuration, so use backups to restore configuration on downgrade.

!) bridge - implemented software based vlan-aware bridges;
https://wiki.mikrotik.com/wiki/Manual:Interface/Bridge#Bridge_VLAN_Filtering
!) switch - "master-port" conversion into a bridge with hardware offload "hw" option;
https://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features#Bridge_Hardware_Offloading
!) detnet - implemented "/interface detect-internet" feature;
https://wiki.mikrotik.com/wiki/Manual:Detect_internet
!) bridge - general implementation of hw-offload bridge (introduced in v6.40rc36);
!) routerboot - RouterBOOT version numbering system merged with RouterOS;
!) w60g - added Point to Multipoint support;
!) w60g - revised "master" and "slave" interface modes to more familiar "bridge", "ap-bridge", "station-bridge";
!) wireless - new driver with initial support for 160 and 80+80 MHz channel width;
*) arm - minor improvements on CPU load distribution for RB1100 series devices;
*) arp - fixed invalid static ARP entries after reboot on interfaces without IP address;
*) bgp - added 32-bit private ASN support;
*) bridge - added comment support for VLANs;
*) bridge - added initial support for hardware "igmp-snooping" on CRS1xx/2xx;
*) bridge - added support for "/interface list" as a bridge port;
*) bridge - assume "point-to-point=yes" for all Full Duplex Ethernet interfaces when STP is used (as per standard);
*) bridge - automatically turn off "fast-forward" feature if both bridge ports have "H" flag;
*) bridge - changed "Host" and "MDB" table column order;
*) bridge - disable "hw-offload" when "horizon" or "external-fdb" is set;
*) bridge - fixed "fast-forward" counters;
*) bridge - fixed ARP setting (introduced in v6.40rc36);
*) bridge - fixed connectivity issues when there are multiple VLAN interfaces on bridge;
*) bridge - fixed hw-offloaded IGMP Snooping service getting stopped;
*) bridge - fixed multicast forwarding (introduced in v6.40rc36);
*) bridge - implemented dynamic entries for active MST port overrides;
*) bridge - implemented software based "igmp-snooping";
*) bridge - implemented software based MSTP;
*) bridge - removed "frame-types" and "ingress-filtering" for bridge interfaces (introduced in v6.40rc36);
*) bridge - set "igmp-snooping=no" by default on new bridges;
*) bridge - show "admin-mac" only if "auto-mac=no";
*) bridge - show bridge interface local addresses in the host table;
*) btest - improved reliability on Bandwidth Test when device`s RAM is almost full;
*) capsman - added "vlan-mode=no-tag" option;
*) capsman - added possibility to downgrade CAP with Upgrade command from CAPsMAN;
*) capsman - return complete CA chain when issuing new certificate;
*) capsman - use "adaptive-noise-immunity" value from CAP local configuration;
*) certificate - added option to store CRL in RAM (CLI only);
*) certificate - fixed SCEP "get" request URL encoding;
*) certificate - improved CRL update after system startup;
*) certificate - show "Expired" flag when initial CRL fetch fails;
*) certificate - show invalid flag when local CRL file does not exist;
*) chr - added KVM memory balloon support;
*) chr - added suspend support;
*) console - do not stop "/certificate sign" process if console times out in 1 minute;
*) console - removed "/setup";
*) crs317 - added initial support for HW offloaded MPLS forwarding;
*) crs317 - fixed reliability on FAN controller;
*) crs326 - fixed packet processing speed on switch chip if individual port link speed differs;
*) crs326 - improved transmit performance from SFP+ to Ethernet ports;
*) crs3xx - added ingress/egress rate input limits;
*) crs3xx - hide unused switch "vlan-mode", "vlan-header-mode" and "default-vlan-id" options;
*) crs3xx - switch VLAN configuration integrated within bridge VLAN configuration with hw-offload;
*) dhcp - fixed DHCP services failing after reboot when DHCP option was used;
*) dhcp - fixed unresponsive DHCP service caused by inability to read not set RAW options;
*) dhcp - require DHCP option name to be unique;
*) dhcp-client - limit and enforce DHCP client "default-route-distance" minimal value to 1;
*) dhcp-server - added "option-set" argument (CLI only);
*) dhcp-server - added basic RADIUS accounting;
*) dhcpv4-client - add dynamic DHCP client for mobile clients which require it;
*) dhcpv4-client - allow to use DUID for client as identity string as the option 61;
*) dhcpv4-server - added "NETWORK_GATEWAY" option variable;
*) dhcpv4-server - strip trailing "\0" in "hostname" if present;
*) discovery - use "/interface list" instead of interface name under neighbor discovery settings;
*) e-mail - do not show errors when sending e-mail from script;
*) eoip - made L2MTU parameter read-only;
*) ethernet - removed "master-port" parameter;
*) export - fixed interface list export;
*) fetch - accept all HTTP 2xx status codes;
*) filesystem - implemented additional system integrity checks on reboots;
*) firewall - added "tls-host" firewall matcher;
*) health - fixed bogus voltage readings on CCR1009;
*) hotspot - fixed "dst-port" to require valid "protocol" in "walled-garden ip";
*) hotspot - fixed Walled Garden IP functionality when address-list is used;
*) ike1 - DPD retry interval set to 5 seconds;
*) ike1 - disallow peer creation using base mode;
*) ike1 - fixed crash on xauth if user does not exist;
*) ike1 - fixed memory corruption when IPv6 is used;
*) ike1 - improved stability on phase1 rekeying;
*) ike1 - release mismatched PH2 peer IDs;
*) ike1 - use /32 netmask if none provided by mode config;
*) ike2 - added support for multiple split networks;
*) ike2 - check identities on "initial-contact";
*) ike2 - do not allow to configure nat-traversal;
*) ike2 - fixed PH1 lifetime reset on boot;
*) ike2 - fixed initiator DDoS cookie processing;
*) ike2 - fixed responder DDoS cookie first notify type check;
*) ike2 - kill connection when peer changes address;
*) ike2 - use peer configuration address when available on empty TSi;
*) interface - added "/interface reset-counters" command (CLI only);
*) interface - added default "/interface list" "dynamic" which contains dynamic interfaces;
*) interface - added option to join and exclude "/interface list" from one and another;
*) interface - fixed corrupted "/interface list" configuration after upgrade;
*) ippool6 - try to assign desired prefix for client if prefix is not being already used;
*) ipsec - added DH groups 19, 20 and 21 support for phase1 and phase2;
*) ipsec - allow to specify "remote-peer" address as DNS name;
*) ipsec - fixed incorrect esp proposal key size usage;
*) ipsec - fixed policy enable/disable;
*) ipsec - improved hardware accelerated IPSec performance on 750Gr3;
*) ipsec - improved reliability on certificate usage;
*) ipsec - renamed "firewall" argument to "notrack-chain" in peer configuration;
*) ipsec - skip invalid policies for phase2;
*) ipv6 - add dynamic "/ip dns" server address from RA when RA is permitted by configuration;
*) l2tp - improved reliability on packet processing in FastPath;
*) l2tp-server - fixed PPP services becoming unresponsive after changes on L2TP server with IPSec configuration;
*) lcd - fixed "flip-screen=yes" state after reboot;
*) log - added "bridge" topic;
*) log - fixed interface name in log messages;
*) log - optimized "poe-out" logging topic logs;
*) lte - added "/interface lte apn" menu (Passthrough requires reconfiguration);
*) lte - added Passthrough support;
*) lte - added Yota non-configurable modem support;
*) lte - added support for ZTE ME3630 E1C with additional "/port" for GPS usage;
*) lte - automatically add "/ip dhcp-client" configuration on interface;
*) lte - changed default values to "add-default-route=yes", "use-peer-dns=yes" and "default-route-distance=2";
*) lte - fixed Passthrough support;
*) lte - fixed authentication for non LTE modes;
*) lte - fixed error when trying to add APN profile without name;
*) lte - fixed rare crash when initializing LTE modem after reset;
*) lte - fixed user authentication for R11e-LTE when new firmware is used;
*) lte - integrated IP address acquisition without DHCP client for wAP LTE kit-US;
*) lte - limited minimal default route distance to 1;
*) lte - update info command with "location area code" and "physical cell id" values;
*) m11g - improved ethernet performance on high load;
*) mac-server - use "/interface list" instead of interface name under MAC server settings;
*) modem - added initial support for Alcatel IK40 and Olicard 500;
*) neighbor - show neighbors on actual bridge port instead of bridge itself
*) netinstall - fixed missing "/flash/etc" on first bootup;
*) netinstall - fixed missing default configuration prompt on first startup after reset/netinstall;
*) ospf - fixed OSPF v2 and v3 neighbor election;
*) ovpn-server - do not periodically change automatically generated server MAC address;
*) poe - added new "poe-out" status "controller-error";
*) poe - fixed false positive excessive logs in auto-on mode when connected to 100 Mbps device powered from another power source;
*) poe - log PoE status related messages under debug topic;
*) ppp - added initial support for PLE902;
*) ppp - added support for Sierra MC7750, Verizon USB730L;
*) ppp - do not disconnect PPP connection after "idle-timeout" even if traffic is being processed;
*) ppp - fixed "change-mss" functionality when MSS option is missing on forwrded packets;
*) ppp - fixed L2TP and PPTP encryption negotiation process on configuration changes;
*) ppp - fixed situation when part of PPP configuration was reset to default values after reboot;
*) pppoe-client - properly re-establish MLPPP session when one of the lines stopped transmitting packets;
*) pppoe-server - fixed situation when PPPoE servers become invalid on reboot;
*) quickset - added support for "/interface list" in firewall, neighbor discovery, MAC-Telnet and MAC-Winbox;
*) quickset - fixed LTE quickset mode APN field;
*) quickset - fixed situation when Quickset automatically changes mode to CPE;
*) quickset - renamed router IP static DNS name to "router.lan";
*) radius - limited RADIUS timeout maximum value to 3 seconds;
*) route - fixed potential route crash on routing table update;
*) scheduler - properly display long scheduler configuration;
*) sfp - fixed SFP interface power monitor when bad SFP DDMI information is received;
*) sftp - added functionality which imports ".auto.rsc" file or reboots router on ".auto.npk" upload;
*) sms - fixed minor problem for SMS delivery;
*) sms - log decoded USSD responses;
*) snmp - fixed "ifHighSpeed" value of VLAN, VRRP and Bonding interfaces;
*) snmp - fixed bridge host requests on devices with multiple bridge interfaces;
*) snmp - fixed bulk requests when non-repeaters are used;
*) snmp - fixed consecutive OID bulk get from the same table;
*) snmp - show only available OIDs under "/system health print oid";
*) ssh - do not use DH group1 with strong-crypto enabled;
*) ssh - enforced 2048bit DH group on tile and x86 architectures;
*) system - show USB topology for the device info;
*) tile - improved hardware encryption processes;
*) tr069-client - fixed "/interface lte apn" configuration parameters;
*) traceroute - improved "/tool traceroute" results processing;
*) upnp - add "src-address" parameter on NAT rule if it is specified on UPnP request;
*) upnp - deny UPnP request if port is already used by the router;
*) ups - fixed duplicate "failed" UPS logs;
*) userman - allow to generate more than 999 users;
*) w60g - added "put-slaves-in-bridge" and "isolate-slaves" options to manage connected clients;
*) w60g - connected stations are treated as separate interfaces;
*) webfig - added favicon file;
*) webfig - fixed router getting reset to default configuration;
*) webfig - fixed terminal graphic user interface under Safari browser;
*) winbox - added "W60G station" tab in Wireless menu;
*) winbox - added "notrack-chain" setting to IPSec peers;
*) winbox - added support for "_" symbol in terminal window;
*) winbox - added switch menu on RB1100AHx4;
*) winbox - do not show MetaROUTER stuff on RB1100AHx4;
*) winbox - do not show duplicate "Switch" menus for CRS326;
*) winbox - do not show duplicate "Template" parameters for filter in IPSec policy list;
*) winbox - do not show duplicate filter parameters "Published" in ARP list;
*) winbox - do not show unnecessary tabs from "Switch" menu;
*) winbox - fixed "/certificate sign" process;
*) winbox - fixed bridge port sorting order by interface name;
*) winbox - show warnings under "/system routerboard settings" menu;
*) wireless - added "allow-signal-out-off-range" option for Access List entries;
*) wireless - added "indonesia3" regulatory domain information;
*) wireless - added passive scan option for wireless scan mode;
*) wireless - added support for CHARGEABLE_USER_ID in EAP Accounting;
*) wireless - check APs against connect-list rules starting with strongest signal;
*) wireless - do not show background scan frequencies in the monitor command channel field;
*) wireless - improved reliability on "rx-rate" selection process;
*) wireless - increased the EAP message retransmit count;
*) wireless - log "signal-strength" when successfully connected to AP;
*) wireless - pass interface MAC address in Sniffer TZSP frames;
*) wireless - updated "UK 5.8 Fixed" and "Australia" country data;
*) wireless - updated "united kingdom" regulatory domain information;
Download: 21,69 Mb
Extra packages https://download2.mikrotik.com/routeros/6.41/all_packages-x86-6.41.zip
https://mikrotik.com/download
User is offlineProfile Card PM
Go to the top of the page
+
Leon71
6.02.2018 - 15:35
Сообщение #9



Honorable Member
Group Icon
Группа: Администраторы
Сообщений: 8855
Регистрация: 16.12.2004

Пользователь №: 78139




Mikrotik RouterOS 6.41.1
Цитата
What's new in 6.41.1 (2018-Jan-30 10:26):
*) bridge - fixed "mst-override" export;
*) bridge - fixed allowed MSTI priority values;
*) bridge - fixed ARP option changing on bridge (introduced v6.41);
*) bridge - fixed hw-offload disabling for Mediatek and Realtek switches when STP/RSTP configured;
*) bridge - fixed hw-offload disabling when adding a port with "horizon" set;
*) bridge - fixed IGMP Snooping after disabling/enabling bridge;
*) bridge - fixed interface list moving in "/interface bridge port" menu;
*) bridge - fixed repetitive port "priority" set;
*) bridge - fixed situation when packet could be sent with local MAC as dst-mac;
*) bridge - fixed VLAN filtering when "use-ip-firewall" is enabled (introduced in v6.41);
*) bridge - properly update "actual-mtu" after MTU value changes (introduced v6.41);
*) btest - fixed TCP test accuracy when low TX/RX rates are used;
*) certificate - do not use utf8 for SCEP challenge password;
*) certificate - fixed PKCS#10 version;
*) crs317 - improved transmit performance between 10G and 1G ports;
*) crs326 - fixed possible packet leaking from CPU to switch ports;
*) crs3xx - hide deprecated VLAN related settings in "/interface ethernet switch port" menu;
*) detnet - additional work on "detect-internet" implementation;
*) dhcpv4-server - fixed framed and classless route received from RADIUS server;
*) discovery - fixed discovery related settings conversation during upgrade from pre-v6.41 discovery implementation (introduced v6.41);
*) dude - fixed e-mail notifications when default port is not used;
*) firewall - fixed "tls-host" firewall feature (introduced v6.41);
*) firewall - limited maximum "address-list-timeout" value to 35w3d13h13m56s;
*) ike1 - fixed "aes-ctr" and "aes-gcm" encryption algorithms (introduced v6.41);
*) ike2 - delay rekeyed peer outbound SA installation;
*) ike2 - improve half-open connection handling;
*) ipsec - properly update IPsec secret for IPIP/EoIP/GRE dynamic peer;
*) log - properly report bridge interface MAC address changes;
*) netinstall - improved LTE package description;
*) netinstall - properly generate skins folder when branding package is installed;
*) ovpn - fixed resource leak on systems with high CPU usage;
*) ppp - changed default value of "route-distance" to 1;
*) ppp - fixed change-mss functionality in some specific traffic (introduced in v6.41);
*) radius - added warning if PPP authentication over RADIUS is enabled;
*) radius - increase allowed RADIUS server timeout to 60s;
*) rb1100ahx4 - fixed reset button responsiveness when regular firmware is used;
*) rb433/rb450 - fixed port flapping on bridged Ethernet interfaces if hw-offload is enabled (introduced in v6.41);
*) routerboot - fixed missing upgrade firmware for "ar7240" devices;
*) sfp - improved SFP module compatibility;
*) snmp - allow also IPv6 on default public community;
*) tile - fixed USB device speed detection after reboot;
*) traffic-flow - do not count single extra packet per each flow;
*) webfig - added support for proper default policies when adding script or scheduler job;
*) webfig - fixed bridge port sorting order by name;
*) webfig - fixed MAC address ordering;
*) webfig - fixed wireless snooper address, SSID and other column ordering;
*) winbox - added "dhcp-option-set" to DHCP server;
*) winbox - allow to specify "to-ports" for "action=masquerade";
*) winbox - do not show "hw" option on non-Ethernet interfaces;
*) winbox - do not show VLAN related settings in switch port menu on CRS3xx boards;
*) wireless - updated "Czech Republic" country 5.8 GHz frequency range;
Download: 21,7 Mb
Extra packages https://download2.mikrotik.com/routeros/6.41.1/all_packages-x86-6.41.1.zip
https://mikrotik.com/download
User is offlineProfile Card PM
Go to the top of the page
+
Реклама

Reply to this topicStart new topic
1 чел. читают эту тему (гостей: 1, скрытых пользователей: 0)
Пользователей: 0 -

 



- Текстовая версия Сейчас: 23.02.2018 - 10:18
]]> ]]>
]]> Яндекс.Метрика Google+ ]]>
Загружается, подождите...